Page 7 of 8
Merlin's H22a8 '99 5th Gen
Posted: Fri Oct 13, 2023 9:37 am
by Merlin
A few weeks ago the car failed its MOT, just on a few silly things:
Intermittent headlight bulb
Front indicators wrong colour
Handbrake needed adjustment
The intermittent headlight bulb was actually a cracked bulb holder, but luckily Vanzep had a brand new one in his parts pile that he kindly gave me. I previously swapped over my clear front indications but forgot to put in the orange bulbs
And yesterday Vanzep gave me a hand to reset my handbrake and properly adjust it.
I picked up some carbon door card inserts from a Japanese auction site. I do have a full interior set already, the radio surround is nice, but the door inserts are heavily scratched. Thankfully, it wasn't too much of a pain to install.
Merlin's H22a8 '99 5th Gen
Posted: Fri Oct 13, 2023 6:27 pm
by vanzep
much better
im not a fan of the fake wood trim on a prelude or any other car for that matter
you should be back driving a lude very soon - good luck with the mot
Merlin's H22a8 '99 5th Gen
Posted: Thu Nov 02, 2023 3:17 pm
by Merlin
The car passed its MOT last week. No advisories as I worked through the small list from when it failed last month. The MOT dude commented on how clean the car was
I have stripped everything of worth from my last 5th gen, but it's the M2P4 gearbox that I wanted to reuse. The gearbox on my new 5G has high rpm grind in 3rd and 4th gears, so I am swapping gearboxes over. It would be silly not to swap the clutch while I'm there as the car has done 82K miles.
The new bits going in are a Competition Clutch lightweight flywheel (2-701-ST), not the ultra lightweight (I have that version on my racecar). Its single piece 4140 forged steel flywheel weighing 5.8Kg.
The timing marks on the edge of the flywheel
This is an ATR OEM clutch plate sitting in place on the CC flywheel, and the space around the edge:
And the OEM pressure plate sitting on the CC flywheel:
I also have a set of new Honda OEM pressure plate bolts and a new set of ARP B16 forged steel flywheel bolts (208-2802) to use.
Merlin's H22a8 '99 5th Gen
Posted: Fri Nov 03, 2023 9:08 am
by TitzonToast
That flywheel looks pretty damn sweet. I would love to upgrade to one myself.
Merlin's H22a8 '99 5th Gen
Posted: Mon Nov 20, 2023 8:59 am
by Merlin
Merlin's H22a8 '99 5th Gen
Posted: Mon May 20, 2024 9:37 am
by Merlin
I recently moved house, so both of my Ludes were put on the back burner. The upshot is the new house has a garage, the first time I have every had one, so the 5th gen is going in there
I have been using my 5th over the last week and it's had lots of people staring.
A few things need going to it. It needs a wheel alignment and I am sure there are some bushes needing replaced on the rear.
Merlin's H22a8 '99 5th Gen
Posted: Tue May 21, 2024 1:35 pm
by wurlycorner
Awesome news, pleased for you! The lude is looking sharp and the garage will help ensure it stays that way!
Merlin's H22a8 '99 5th Gen
Posted: Tue May 21, 2024 5:54 pm
by nalla
Are the headlights Stanley ones or aftermarket?
They look good anyway.
Merlin's H22a8 '99 5th Gen
Posted: Tue May 21, 2024 9:16 pm
by JEBB4
Car looks very nice mate.. congrats on new house and garage
Merlin's H22a8 '99 5th Gen
Posted: Wed May 22, 2024 9:59 am
by Merlin
nalla wrote: ↑Tue May 21, 2024 5:54 pm
Are the headlights Stanley ones or aftermarket?
They are OEM headlights with the sliver insides sprayed black. You can put each headlight in the oven at a low temp and get the glue to soften and prise them apart. They are Sikaflex'd back together.
I think I'm going to get a cover for the car for when it's inside the garage. Will put up a post asking for opinions on what to get.