
It's pretty easy but thought I'd just do a write-up on it anyway.
You will need one of these. A Bung

Firstly, remove the cap covering the nut by lifting from the back so you unhook it. It might be a bit stiff so may need to use a screwdriver or something to prize it loose.

This reveals the nut (12mm i think) Remove

This releases the wiper arm so remove that. and you are left like this

Remove the rubber cover to reveal the 23mm nut and remove that too.

Then open the boot and locate the motor underneath. Disconnect the plug

Then remove the Three 10mm bolts and the motor will come away


Then remove the rubber gromet from the window here


That's it all removed. Just clean up the glass and add a small amount of sealant to the bung and fit!

Wider shot (Ignore the completely filthy car

