BB6 - Thusee from Toronto!

[thusee]

Hey guys, figured i would just keep this page updated

Current status as of July 8' 2017 CEPM Pictures on PG 37

[thusee]

RSX Steering wheel!

[rob quilter]

Looking good.

[thusee]

Restored my headlights today as well.

Before Right side


After Right Side


Before Left Side


After Left Side


Final:

[thusee]

Looking good.

Thanks !

[nitin_s1]

Nice!!!

[thusee]

^ Thanks, picking up another set of wheels tomomorrow Will be a spring set, and then ill have the ap1 wheels for summer!

[thusee]

Finally changed the knock sensor!

Old


And this is how it was hanging above the oil filter...


Used


What a difference the knock sensor makes. Bought the car with the engine light on with a defective knock sensor.....man what a difference now i love it even more!

[thusee]

Figured i would post this:

This is what i used for the headlights to restore them. There was no sanding involved.



Also not in the picture is a glass cleaner.

1) Sprayed the lense with glass cleaner to give it a little clean up.

2) Spread a layer of Light to Medium Polishing compound, and then added more to the pad and went at it and constantly adding a little more compound as i kept rubbing.

3) Wipe away all the compound and constantly rotating the towel around so its always a clean side

4) Spread a layer of Medium to heavy rubbing compound and did the same thing.

5) Wipe away all the compound and constantly rotating the towel around so its always a clean side

6) Applied the cleaner wax let it sit for a bit and then wipe it all off!

Both sides took me a total of 20 minutes to do

Here is the video i followed!

[jdmdanbb6bb4]

nice the work you have done.