Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Gauges installed using CF blanking plate
Gauges installed using CF blanking plate
Installed some prosport 45mm gauges in the Carbon Fibre plate I bought of A1ex on the forum.
They look alright:
They look alright:
Last edited by BMCC on Mon Mar 19, 2012 6:37 pm, edited 1 time in total.
Re: Gauges installed using CF blanking plate
Cheers, it is not as close as it looks though as I have hidden some of the CF with the radio surround.A1ex wrote:Nice work. The cut looks scarily close to the edge of the fibre, did a good job not to break it there.
- lewd lude lover
- Supporter 2015
- Posts: 5658
- Joined: Sat Aug 07, 2010 9:51 pm
- My Generation: 5G
- Has thanked: 25 times
- Been thanked: 17 times
Ah cool, I had a mil or so tucked in behind mine. Did you have to trim much off the edge to get it in?
The finish looks good from the pictures too, will have to cut a fresh one for mine at some point
How was the mounting in the end, did you try again with the glue?
The finish looks good from the pictures too, will have to cut a fresh one for mine at some point
How was the mounting in the end, did you try again with the glue?
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
Re: Gauges installed using CF blanking plate
In the end I took a good few mm's off, just spent a few hours sanding the plate down till I was happy with the fit. I'll leave the plate just now with it tucked into the radio surround but if it starts to move I might just get some double sided tape and see how that works.A1ex wrote:Ah cool, I had a mil or so tucked in behind mine. Did you have to trim much off the edge to get it in?
The finish looks good from the pictures too, will have to cut a fresh one for mine at some point
How was the mounting in the end, did you try again with the glue?
Best way to do it, I knew it was too big when I sent it but wasn't sure how much as my car wasn't around to test it Figured it was best to send it too big than guess it and it be too small
Anyhow, good work. Have some rep
Anyhow, good work. Have some rep
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
Re: Gauges installed using CF blanking plate
Cheers!A1ex wrote:Best way to do it, I knew it was too big when I sent it but wasn't sure how much as my car wasn't around to test it Figured it was best to send it too big than guess it and it be too small
Anyhow, good work. Have some rep
Rep'd back! Can recommend buying carbon stuff of Alex ordered the plate and delivered in quick time.