Page 101 of 109
Drax's JUN Prelude: Papa Smurf edition
Posted: Fri Nov 22, 2019 2:00 pm
by Drax
Drax's JUN Prelude: Papa Smurf edition
Posted: Sun Nov 24, 2019 2:08 pm
by vanzep
very nice Drax
i see they are replacing konis - you will need to let us know how they compare
Drax's JUN Prelude: Papa Smurf edition
Posted: Tue Jan 21, 2020 12:45 pm
by Drax
Lude is off to Bri's bodyshop early next month.......#excited
Drax's JUN Prelude: Papa Smurf edition
Posted: Tue Jan 21, 2020 10:22 pm
by Andyjess666
How long is it in there for matey
Drax's JUN Prelude: Papa Smurf edition
Posted: Wed Jan 22, 2020 8:42 am
by Drax
Andyjess666 wrote: ↑Tue Jan 21, 2020 10:22 pm
How long is it in there for matey
just around a week - a few days for the welding or the replacement arches and a few days for the spraying them in after
Drax's JUN Prelude: Papa Smurf edition
Posted: Wed Jan 22, 2020 9:18 am
by Andyjess666
That's good mate quick turn around you be buzzing for the warmer weather when you get it back
Drax's JUN Prelude: Papa Smurf edition
Posted: Wed Jan 22, 2020 12:36 pm
by ATR84
Prelude in new arches shock
I'm sure it will be very satisfying once it is done
Drax's JUN Prelude: Papa Smurf edition
Posted: Mon Mar 30, 2020 11:09 am
by Drax
replaced the front ARB bushes recently, plus gave the wheels new Honda Access nuts as i didnt trust any aftermarket ones any more for not rusting and risking them rounding if i wanted the wheels off.
appart from that, ive done a little more to wiring in the parking pole loom - nearly there hopefully. she's still sitting pretty on the drive, waiting for a new MOT soon
Drax's JUN Prelude: Papa Smurf edition
Posted: Mon Mar 30, 2020 11:17 am
by Drax
oh and one for the fellow star wars nerds out there. we have a laser in work i look after, which has a monitor attached to watch it etch whatever your doing. i saw this and instantly wanted to modify the screen and so printed this on laminate....
which then went on the screen like so...
looks even better when the light inside the laser area is off
fellow nerds should know what this is a picture of
Drax's JUN Prelude: Papa Smurf edition
Posted: Thu Apr 30, 2020 3:59 pm
by Drax
Quick update, still not had the arches done due to Bri being busy but there's no rush. Good thing though, she's back on the road with a fresh MOT, passed first time
just two front lower ball joints as an advisory so ive had them done. Need to get the tracking done next, probably try for a slightly more fast road setup but not sure how much of this can be achieved without adjustable joints.
Had a compression test done on the block which reads an average 250 overall which is pretty pleasing.
Need to restore the cf a little as the roof and spoiler are looking haggered, plus the bonnet needs more lacquer. ABS light keeps flickering on & off too on an 1(11) code so need to look at that too, plus clean up some centre console electrics as my fogs keep shorting and im struggling getting the parking pole working.
overall though, it means once it warms up again and lockdown is over then its
time