Lude Generation

nitin_s1 wrote:I love the access/options catalogues as they have so much cool stuff

OH YES


so went to take off the front two wheels to swap the tyres for pre-mot requirements and this happened...ffs


after buying a replacement of each (as i couldn't get the snapped bit out) i got them done though


and while waiting for fitting, the daughter decided to test new bucket seats like a boss

Had some starting issues the last few times with the BB1. Pretty sure it's too do with my dodgy ignition wiring but I wanted to run something past people ...

I turn the ignition, car starts, but then immediately goes off when releasing the key. Had this a few years ago and it was the ignition switch, but checked it tonight and it looks ok (no guarantee that's it's still not the cause).

After two attempts, I held the key turning over longer than you should after the engine started and it kept it alive this time once the key was released... Any thoughts?

Sounds like the switch to me.

You could remove the wire from the starter. Get someone to hold the wire to the starter whilst you start it, then once you're started it and continue to hold the key in position disconnect the starter. See if it continues to run.

will do cheers Nath!

I've had a thought the other day that I may need to change my gearbox oil soon, I know Merlin put in Torco MTF fluid and Redline friction modifier to his, but how long after running the standard Honda MTF stuff to clean out the box I can't remember. Merlin do you remember roughly? (I don't know how to tag anymore )

I have an MFactory 4.64 FD & LSD.

I seem to remember that tag doesn't work anymore Nath

Yep - it's mention now, like:
Nafe did it right

Ah did he? Brill, thank you both

Drax wrote: ↑

Tue Nov 20, 2018 1:51 pm

will do cheers Nath!

I've had a thought the other day that I may need to change my gearbox oil soon, I know Merlin put in Torco MTF fluid and Redline friction modifier to his, but how long after running the standard Honda MTF stuff to clean out the box I can't remember. Merlin do you remember roughly? (I don't know how to tag anymore )

I have an MFactory 4.64 FD & LSD.

I use Amsoil MTF with Redline friction modifier (only because I have a plate diff) https://www.opieoils.co.uk/p-1051-amsoi ... d-mtf.aspx

If you have a viscous or Torsen (helical) diff you don't need to use the friction modifier as the formulation of Honda MTF / Amsoil / Torco is fine to use as it is.

indigolemon wrote: ↑

Tue Nov 20, 2018 2:32 pm

Yep - it's mention now, like:

Code: Select all

[ mention ] username [ /mention ]

Nafe did it right

It didnt give me a notification