Lude Generation

Posted: **Mon Apr 13, 2015 5:37 pm**

Hi everyone! I am newbie here, and first I want to apologize for my bad english.
I am from Serbia, Belgrade. I had more than 10 Honda's for last 10 years and prelude is one of the best Honda I ever drive.

Originaly it was BB9 2.0 F20A4. The car is painted before 2 years in black. Next mod was 282mm brake discs with calipers from VTi, and than I swapped an H22A5 with M2F5 (H22A2 4gen) manual transmission, ECU, exhaust, ignition and immobiliser...

There are also small underhood modification like:

EGR off
Short ram intake
De Cat
Oil catch can

After that, dyno shows 202hp and 234nm. Very satisfied for me.

Other mods:

Bixenon projectors in the headlight
Double din with GPS, DVD, Radio...
Kosei Racing K1 TS alloy wheel 6.3 kg with 205/45 R17 tyres

Plans for N/A tuning in another thread, where I need some advices

Posted: **Mon Apr 13, 2015 6:33 pm**

welcome in buddy your English is fine

Posted: **Mon Apr 13, 2015 7:22 pm**

Hi, and welcome to LG.
Great looking Prelude!
What does that button do between the roof-button and foglight?
Cheers

Posted: **Mon Apr 13, 2015 9:10 pm**

Welcome. As others have said, your English is fine

What was your reason for egr removal, if you don't mind me asking? Did it cause any problems with faults on the ecu when you took it off?

Posted: **Mon Apr 13, 2015 9:43 pm**

Sven wrote:Hi, and welcome to LG.
Great looking Prelude!
What does that button do between the roof-button and foglight?
Cheers

Thanks!
That button was switch between gas / lpg. Car had installed LPG system. I don't know how much is LPG popular in England...

wurlycorner wrote:What was your reason for egr removal, if you don't mind me asking? Did it cause any problems with faults on the ecu when you took it off?

Yes, i had problem in 2000-3000 rpm range with little cutting. When I clossed EGR, everything work's great, except sometimes when the engine is cold, turn on CEL, code 12 - EGR - exhaust gas recirculation lift valve.

Posted: **Thu Apr 30, 2015 9:00 pm**

Anybody have some experience with eibach pro kit springs? I want to buy it, new or used...

Posted: **Thu Apr 30, 2015 9:06 pm**

I have them. 30mm drop, progressive and quite soft. Would reccomend

Posted: **Thu Apr 30, 2015 9:13 pm**

Welcome bud

Posted: **Thu Apr 30, 2015 9:32 pm**

Vtecbg wrote:Anybody have some experience with eibach pro kit springs? I want to buy it, new or used...

My 1998 BB8 has 30mm drop on Eibach springs - handles well but scrapes over speed bumps all the time.

Posted: **Thu Apr 30, 2015 10:39 pm**

Plenty of people on here are/have run eibach springs and they're well regarded.

Lude Generation

My 1998 prelude

My 1998 prelude

Re: My 1998 prelude

Re: My 1998 prelude

Re: My 1998 prelude

Re: My 1998 prelude