Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
JEBB4's White BB2 (yang). New wheels and lip fitted
- JEBB4
- Supporter 2014
- Posts: 1222
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 76 times
- Been thanked: 61 times
Re: JEBB4's White BB2 (yang). H22A swapped. Update pics p12
Got some stuff done on this the past week...
After I finally got it running I took it for a small drive and found that it wouldn't idle at all when up to temp, I assumed this to be a sticky IACV after attempting to reset the idle , so took it off and cleaned it hoping for the best but to no avail so I'm contemplating a new one but I thought I'd best take it to work to do more fault finding and on the way it threw an engine light, this was good, fault was EGR which led me to realise the vac pipes to and from the egr control solenoid where the wrong way around so swapped em over and all is well, car pulls good, no smoke or leaks, however when cruising at around 3k rpm I get some surging which I'm thinking could be the dizzy about to crap itself..
Anyway I did about 150km on the weekend and no issues so so far so good..
I decided to finally fit a few things I've had for ages, put my short shifter in
Also did the little trick of notching the centre console so the cable doesn't contact it..
I found someone's stash of bitten off finger nails under the console too...... which was nice
After I finally got it running I took it for a small drive and found that it wouldn't idle at all when up to temp, I assumed this to be a sticky IACV after attempting to reset the idle , so took it off and cleaned it hoping for the best but to no avail so I'm contemplating a new one but I thought I'd best take it to work to do more fault finding and on the way it threw an engine light, this was good, fault was EGR which led me to realise the vac pipes to and from the egr control solenoid where the wrong way around so swapped em over and all is well, car pulls good, no smoke or leaks, however when cruising at around 3k rpm I get some surging which I'm thinking could be the dizzy about to crap itself..
Anyway I did about 150km on the weekend and no issues so so far so good..
I decided to finally fit a few things I've had for ages, put my short shifter in
Also did the little trick of notching the centre console so the cable doesn't contact it..
I found someone's stash of bitten off finger nails under the console too...... which was nice
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321
- JEBB4
- Supporter 2014
- Posts: 1222
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 76 times
- Been thanked: 61 times
Re: JEBB4's White BB2 (yang). H22A swapped. Update pics p12
I have also fitted a JDM drivers seat belt with the holder arm thing as well as my tein springs and kyb struts..
Oh and I thought I'd see how the regamasters look on there, I'm not too sure don't look quite right
Oh and I thought I'd see how the regamasters look on there, I'm not too sure don't look quite right
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21217
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1958 times
- Been thanked: 239 times
- sol-lude
- Posts: 1032
- Joined: Wed Jul 17, 2013 1:48 pm
- My Generation: 4G
- PSN GamerTag: Lude_666
- Location: Kirriemuir
- Has thanked: 10 times
- Been thanked: 18 times
Re: JEBB4's White BB2 (yang). H22A swapped. update pics p14
Great work there mate. Agree with wurly on this one think if she was lower it would lose the large gap. Like the wheels.
Those nails though
Sent from my SM-G935F using Tapatalk
Those nails though
Sent from my SM-G935F using Tapatalk
- vanzep
- Supporter 2016
- Posts: 6977
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 254 times
- Been thanked: 394 times
gross fingernail clipping collection - ffs who cuts their nails in the car and stashes them in the same place year after year
nice work with fm short shifter-hope you set it on the shortest throw
nice work with fm short shifter-hope you set it on the shortest throw
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- JEBB4
- Supporter 2014
- Posts: 1222
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 76 times
- Been thanked: 61 times
Re: JEBB4's White BB2 (yang). H22A swapped. update pics p14
Cheers for the comments guys
Yeah I think it is the lack of lows and the amount of white, if the wheels had the regamaster stickers on them they would be acceptable..
I think I'm gunna sell the regas, buy some coilovers and cheaper wheels but same size..
Yeah I think it is the lack of lows and the amount of white, if the wheels had the regamaster stickers on them they would be acceptable..
I think I'm gunna sell the regas, buy some coilovers and cheaper wheels but same size..
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321