Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

BB4 Road/Track lude

Tell us all about your Lude, you know you want to ...
Post Reply
User avatar
si import
Supporter 2016
Posts: 1252
Joined: Sun Jan 29, 2012 4:47 pm
My Generation: 4G
Location: Essex
Has thanked: 2 times
Been thanked: 23 times

BB4 Road/Track lude

Post by si import » Sun Dec 23, 2012 9:03 am

Imageurl=http://s1185.photobucket.com/user/impor ... 0.jpg.html]Image[/url]
Thought i would start a new profile for my current lude. It was originally brought to be my daily drive but after my son was born it wasn't practical to keep it so i put it up for sale.
i had a track lude which i was going to be repairing the rear arches on, but after having a closer look the rot had spread to the inner arches so i decided to keep my daily and turn it into my new road legal track lude.
i will be swapping most parts from my old lude onto this one.
Heres a few pics of what it looked like when i brought it.
Image
Image
here it what it looks like currently.
Image
Image
Image
its current spec.

Engine: Fujitsubo Manifold
Custom 3inch exhaust system
H22a7 intake manifold
H22a7 camshafts
Bmc cda cold air intake
Manual tensioner conversion
Fidanza lightweight flywheel
Exedy clutch
P75 ecu with hondata s300
Pas removal
Balance shaft belt removed
10mm megacore ignition leads
Fitv delete
Egr valve delete
Lightweight alernator pulley
Innovative 95a engine mounts



Suspension: Meister r coilovers
Fully polybushed
Front upper strut brace
Rear upper know brace
Rear lower brace
White line rear arb
Innovative traction bar
Adjuster rear tie rods

Brakes: ATR front calipers with 300mm vented discs
Red stuff front pads
Rear drilled and grooved discs
Blueprint rear pads
Braided Brake hoses

Wheels+Tyres: Rota Grid Drift 16x8 ET10
Toyota proxies t1r 205/50/16


Exterior : Front lip
Value sports version 3 rear spoiler (replica)
Carbon fibre bonnet
Black roof and tailgate


Interior: sparco corsa bucket seat
Willians 4 point harnesses
Deep dish steering wheel
Stripped interior


i have plenty of bits still to fit which were not yet fitted to my previous lude . i will try and update this as and when i fit the parts. Cheers Jon
Last edited by si import on Mon Dec 31, 2018 3:40 pm, edited 7 times in total.
http://www.ludegeneration.co.uk/profile ... t4910.html
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
Image

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Sun Dec 23, 2012 9:26 am

Love those rims Jon. They make all the difference 8)

Now hurry up and get that traction bar and mounts fitted!

User avatar
si import
Supporter 2016
Posts: 1252
Joined: Sun Jan 29, 2012 4:47 pm
My Generation: 4G
Location: Essex
Has thanked: 2 times
Been thanked: 23 times

Re: BB4 Road/Track lude

Post by si import » Sun Dec 23, 2012 9:31 am

cheers mate. Yeah they do make a big difference.Get compliments about them all the time.
Im going to try make a start on fitting them tomorrow and between christmas and new year. will get some pics up once i make a start.
http://www.ludegeneration.co.uk/profile ... t4910.html
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
Image

User avatar
Ferdie
LotM Winner
Posts: 562
Joined: Fri Feb 03, 2012 8:05 pm
My Generation: 4G
XBOX GamerTag: fieszefreddie
Location: The Netherlands
Been thanked: 1 time

Post by Ferdie » Sun Dec 23, 2012 9:46 am

Hee

damnn love that rims

what is the size of the rim with offset and size of thires??

User avatar
si import
Supporter 2016
Posts: 1252
Joined: Sun Jan 29, 2012 4:47 pm
My Generation: 4G
Location: Essex
Has thanked: 2 times
Been thanked: 23 times

Re: BB4 Road/Track lude

Post by si import » Sun Dec 23, 2012 10:01 am

cheers. there 16x8 ET10. currently have 195/45/16 but am thinking of changing to either 195/50/16 or 205/50/16 so its closer to the stock size wheels
http://www.ludegeneration.co.uk/profile ... t4910.html
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
Image

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Sun Dec 23, 2012 10:37 am

si import wrote:cheers mate. Yeah they do make a big difference.Get compliments about them all the time.
I'm trying to get hold of a set of them in 17x9J, but the offset I want is only available in the States :roll: There was a one-off second hand set on ebay the other day, but second hand they still went for £495! :shock: They weren't the colour I wanted, otherwise I would have gone for them. But before shipping and customs I've found a place that will sell them for £430 brand new and in the colour I want ;-)

vtectom
Posts: 1145
Joined: Sat Feb 25, 2012 6:03 pm
My Generation: 4G

Post by vtectom » Sun Dec 23, 2012 10:56 am

Good stuff Jon.

Are you going to re-locate battery to the boot again?

If/when you do, remember to invite me along & we'll do mine at the
same time :D

Do I need one of these?;
http://www.ebay.co.uk/itm/2004-Honda-Ci ... 337b37de7d

User avatar
si import
Supporter 2016
Posts: 1252
Joined: Sun Jan 29, 2012 4:47 pm
My Generation: 4G
Location: Essex
Has thanked: 2 times
Been thanked: 23 times

Re: BB4 Road/Track lude

Post by si import » Sun Dec 23, 2012 6:52 pm

NafemanNathan wrote:
si import wrote:cheers mate. Yeah they do make a big difference.Get compliments about them all the time.
I'm trying to get hold of a set of them in 17x9J, but the offset I want is only available in the States :roll: There was a one-off second hand set on ebay the other day, but second hand they still went for £495! :shock: They weren't the colour I wanted, otherwise I would have gone for them. But before shipping and customs I've found a place that will sell them for £430 brand new and in the colour I want ;-)
what offset are you looking for.
£430 doesn't seem to bad but then it depends what shipping and customs will cost.
They are defiantly a nice set of wheels though and do stand out.
vtectom wrote:Good stuff Jon.

Are you going to re-locate battery to the boot again?

If/when you do, remember to invite me along & we'll do mine at the
same time :D

Do I need one of these?;
http://www.ebay.co.uk/itm/2004-Honda-Ci ... 337b37de7d
cheers mate. i have already relocated the battery to the boot but i can still come give you a hand if needed. Ive just used my stock battery tray to mount it at the moment but will be getting an after market one soon enough.
http://www.ludegeneration.co.uk/profile ... t4910.html
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
Image

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Sun Dec 23, 2012 10:17 pm

si import wrote:
NafemanNathan wrote:
si import wrote:cheers mate. Yeah they do make a big difference.Get compliments about them all the time.
I'm trying to get hold of a set of them in 17x9J, but the offset I want is only available in the States :roll: There was a one-off second hand set on ebay the other day, but second hand they still went for £495! :shock: They weren't the colour I wanted, otherwise I would have gone for them. But before shipping and customs I've found a place that will sell them for £430 brand new and in the colour I want ;-)
what offset are you looking for.
£430 doesn't seem to bad but then it depends what shipping and customs will cost.
They are defiantly a nice set of wheels though and do stand out.
Exactly. I've got Scott from H-Tune looking into it for me ;-)

After ET12.

User avatar
si import
Supporter 2016
Posts: 1252
Joined: Sun Jan 29, 2012 4:47 pm
My Generation: 4G
Location: Essex
Has thanked: 2 times
Been thanked: 23 times

Innovative traction bar fitted

Post by si import » Tue Jan 08, 2013 11:01 am

been busy morning. got the traction bar fitted . is an awesome bit of kit . ive taken a few pics.
Image
Image
Image
Image
Image

also removed all the p/s system and removed the last bits of the a/c system.
next is to fit the mounts. cheers Jon
Last edited by si import on Wed Mar 20, 2013 7:09 pm, edited 2 times in total.
http://www.ludegeneration.co.uk/profile ... t4910.html
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
Image

Post Reply

Return to “Lude Profiles”