Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

New (almost) owner

New member? Introduce yourself here!
sheo
Posts: 9
Joined: Mon Jun 25, 2018 7:14 pm
My Generation: 5G

Post by sheo » Fri Jul 06, 2018 12:58 pm

Thanks, good information ! It took about 2.5 to get to the mark on the dipstick, it was leaking while it's been sat, so I'm keeping it topped up with the new stuff to the dipstick.

I was told you need to change it twice at least.. maybe i'll give it a go, I'm just worried about wasting too much money .. the ATF is £ 40 for 4 litre, so doing it 3 times is quite an investment. Not if it does solve it of course, but if it still makes no difference, it's money down the drain (Not literally of course, I took the old oil to the tip) :D

User avatar
toadster
Posts: 1847
Joined: Thu Feb 16, 2012 5:21 pm
My Generation: 5G
Location: Norfolk
Has thanked: 57 times
Been thanked: 135 times

Post by toadster » Fri Jul 06, 2018 3:08 pm

Lo
I have to admit I got a garage to do mine.
I believe it should take 3.5 litres ISH on each change.
I think it holds about 7 litres I can't remember exactly.
Good luck with it though.
Cheers ;)
Toadster.
Image

sheo
Posts: 9
Joined: Mon Jun 25, 2018 7:14 pm
My Generation: 5G

Post by sheo » Mon Jul 09, 2018 9:20 am

I did ask the local auto centre place but they said they wouldn't touch it and I would have to find a transmission specialist.. I only wanted them to change the fluid.

Anyway, It seems to have quite a bad leak so I probably should look at that before I fill it again. Are the any usual suspects for leaks of the ATF? Can't see obviously where it is coming from from above or below.


User avatar
indigolemon
The Chaos Engine
Posts: 6676
Joined: Wed Jun 30, 2010 1:45 pm
My Generation: 4G
PSN GamerTag: M149YSL
Location: Kelty, Fife
Has thanked: 20 times
Been thanked: 70 times
Contact:

Post by indigolemon » Mon Jul 09, 2018 10:59 am

You should have pipework to/from the radiator (which has a built in ATF cooler). I'd start there, as that's the simplest fix for sure. Is it dripping off the undertray?
'On two occasions I have been asked, 'Pray, Mr. Babbage, if you put into the machine wrong figures, will the right answers come out?' I am not able rightly to apprehend the kind of confusion of ideas that could provoke such a question.' - Charles Babbage

sheo
Posts: 9
Joined: Mon Jun 25, 2018 7:14 pm
My Generation: 5G

Post by sheo » Mon Jul 09, 2018 2:29 pm

Great, thanks I will start there. It is indeed dripping from the undertray.

Max
Posts: 520
Joined: Mon Apr 11, 2016 10:59 am
My Generation: 5G
Location: Cheltenham
Has thanked: 49 times
Been thanked: 25 times

Post by Max » Mon Jul 09, 2018 5:06 pm

If its the ATF cooler hard lines going into the rad theres a good chance the root of the issue is the rad leaking on the hard lines, causing them to corrode and then leak ATF, i found the same issue on my type s (it uses the auto rad cooler to cool the ATTS), i changed the rad and bought some samco coolant piping to replace it and i haven't had a coolant or ATTS fluid leak since.

It was a surprisingly easy job too, hope that helps :)

Post Reply

Return to “New Members”