Lo
I'm surprised finding the correct clutch for a 3rd gen is such a hassle
Cheers
Toadster
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
New Member with 3rd Gen
Re: New Member with 3rd Gen
Thanks everyone. I have got the number from the gearbox and that didn't help and the flipping clutch plate didn't have a code on it. I have contacted a company who might be able to match it or (last resort) get one fabricated. Thanks again as I appreciate your help. Helen
- vanzep
- Supporter 2016
- Posts: 6977
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 254 times
- Been thanked: 394 times
Re: New Member with 3rd Gen
There is an 3 piece exedy clutch kit for 3rd gen on ebay for £40
https://www.ebay.co.uk/itm/H110040-3-PC ... :rk:3:pf:0
or take Rattys advice and try sources in USA - Ive used RockAuto a few times for hard to get parts and so have others.
https://www.ebay.co.uk/itm/H110040-3-PC ... :rk:3:pf:0
or take Rattys advice and try sources in USA - Ive used RockAuto a few times for hard to get parts and so have others.
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- RattyMcClelland
- Moderator
- Posts: 9195
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 182 times
Re: New Member with 3rd Gen
https://www.hondapartsnow.com/genuine/h ... 1-a00.html
Brand new genuine oem clutch direct from Honda USA. I buy from here all the time.
Brand new genuine oem clutch direct from Honda USA. I buy from here all the time.
Re: New Member with 3rd Gen
Thanks again - I have emailed both the guy with the clutch on ebay and Honda USA The 10mm difference is proving to be a pain in the arse
Re: New Member with 3rd Gen
I am desperately trying to get a picture of my gregor on here to show you all. I freaking love that car to bits and want to do the Gumball Rally in him next year......I am determined to get a clutch
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21217
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1958 times
- Been thanked: 239 times
Re: New Member with 3rd Gen
Where are you measuring the 212 and 215/216mm?
I think I have a used 3rd gen clutch and flywheel on the shelf (ready for manual conversion of my preface 3rd gen at some point) that I can try and measure for you if you like?
I think I have a used 3rd gen clutch and flywheel on the shelf (ready for manual conversion of my preface 3rd gen at some point) that I can try and measure for you if you like?
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
New Member with 3rd Gen
OMG wurlycorner, if you could measure that I would be thrilled, thank you. The cover plate is 216mm is the measurement directly across the plate that has been taken off of my car. The clutch I bought which was supposed to be right for the car had a cover plate of 215mm and we can't get it to fit at all. I know it sounds like not a lot but it's a huge difference. I have been forced to send my original clutch cover plate to TechniClutch and they are going to try and match it but website feedback on them is making me very nervous indeed and I am trying to keep my hopes in check I really want to get the car back up and running as I want to do a gumball rally in it this year
Thanks again for your help. Any help and advice given is always gratefully received
Thanks again for your help. Any help and advice given is always gratefully received