New Member with 3rd Gen

toadster · Post by **toadster** » Tue Dec 18, 2018 6:34 pm

Lo

I'm surprised finding the correct clutch for a 3rd gen is such a hassle

Cheers

Toadster

hellz356 · Post by **hellz356** » Thu Dec 20, 2018 11:07 pm

Thanks everyone. I have got the number from the gearbox and that didn't help and the flipping clutch plate didn't have a code on it. I have contacted a company who might be able to match it or (last resort) get one fabricated. Thanks again as I appreciate your help. Helen

Post by **vanzep** » Sat Dec 22, 2018 2:52 pm

There is an 3 piece exedy clutch kit for 3rd gen on ebay for £40
https://www.ebay.co.uk/itm/H110040-3-PC ... :rk:3:pf:0

or take Rattys advice and try sources in USA - Ive used RockAuto a few times for hard to get parts and so have others.

Post by **RattyMcClelland** » Sat Dec 22, 2018 5:56 pm

https://www.hondapartsnow.com/genuine/h ... 1-a00.html
Brand new genuine oem clutch direct from Honda USA. I buy from here all the time.

hellz356 · Post by **hellz356** » Sat Dec 22, 2018 10:04 pm

Thanks again - I have emailed both the guy with the clutch on ebay and Honda USA The 10mm difference is proving to be a pain in the arse

hellz356 · Post by **hellz356** » Sat Dec 29, 2018 12:06 pm

I am desperately trying to get a picture of my gregor on here to show you all. I freaking love that car to bits and want to do the Gumball Rally in him next year......I am determined to get a clutch

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Sun Dec 30, 2018 1:12 am

Where are you measuring the 212 and 215/216mm?

I think I have a used 3rd gen clutch and flywheel on the shelf (ready for manual conversion of my preface 3rd gen at some point) that I can try and measure for you if you like?

hellz356 · Post by **hellz356** » Thu Jan 03, 2019 1:39 am

OMG wurlycorner, if you could measure that I would be thrilled, thank you. The cover plate is 216mm is the measurement directly across the plate that has been taken off of my car. The clutch I bought which was supposed to be right for the car had a cover plate of 215mm and we can't get it to fit at all. I know it sounds like not a lot but it's a huge difference. I have been forced to send my original clutch cover plate to TechniClutch and they are going to try and match it but website feedback on them is making me very nervous indeed and I am trying to keep my hopes in check

I really want to get the car back up and running as I want to do a gumball rally in it this year

Thanks again for your help. Any help and advice given is always gratefully received

Lude Generation

New Member with 3rd Gen

Re: New Member with 3rd Gen

Re: New Member with 3rd Gen

Re: New Member with 3rd Gen

Re: New Member with 3rd Gen

Re: New Member with 3rd Gen

Re: New Member with 3rd Gen

Re: New Member with 3rd Gen

New Member with 3rd Gen