Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

back again, for a 4th time

New member? Introduce yourself here!
Post Reply
stevo90
Posts: 60
Joined: Fri Apr 20, 2012 10:04 pm
My Generation: 5G
Location: west sussex
Been thanked: 1 time

back again, for a 4th time

Post by stevo90 » Sun Apr 12, 2020 8:50 pm

hi folks, back again for a 3rd time, :D

picked up a 1998, 2.0 manual bb9, needs rear arches(inner and outer), looks to have had outers before but rot has come back. already have a h22 engine from my old accord type r. plans are to get arches done, car resprayed,(cousin owns a bodyshop) drop engine in and have a summer show car. im aiming for april next year to have it built and ready. first question, what do i need to go from 4 stud to 5 stud, it it just hub knuckles, im going to be running tein coilovers and a set of uprated brakes. £300.00 with mot

Image93039020_10158391208809680_3356065588005830656_n by steve finch, on Flickr

thanks, steve

User avatar
vanzep
Supporter 2016
Posts: 6960
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 251 times
Been thanked: 392 times

back again, for a 4th time

Post by vanzep » Sun Apr 12, 2020 10:57 pm

welcome back :thumbup:
4th gen 2.0 takes 4th gen 2.2 vtec driveshafts and all 4th gen and 5th gen manual gearboxes are interchangeable so based on that id say just swap hub knuckles from 5th gen vtec should be fine - only other thing to check would be abs/vs non abs knuckle.

sure someone else can confirm ;)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21205
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1929 times
Been thanked: 236 times

back again, for a 4th time

Post by wurlycorner » Sun May 03, 2020 6:36 pm

Welcome back
Have fixed the link so pic shows - you need to use the "BBCode" link from flickr.

Post Reply

Return to “New Members”