Lude Generation

hi folks, back again for a 3rd time,

picked up a 1998, 2.0 manual bb9, needs rear arches(inner and outer), looks to have had outers before but rot has come back. already have a h22 engine from my old accord type r. plans are to get arches done, car resprayed,(cousin owns a bodyshop) drop engine in and have a summer show car. im aiming for april next year to have it built and ready. first question, what do i need to go from 4 stud to 5 stud, it it just hub knuckles, im going to be running tein coilovers and a set of uprated brakes. £300.00 with mot

93039020_10158391208809680_3356065588005830656_n by steve finch, on Flickr

thanks, steve

welcome back
4th gen 2.0 takes 4th gen 2.2 vtec driveshafts and all 4th gen and 5th gen manual gearboxes are interchangeable so based on that id say just swap hub knuckles from 5th gen vtec should be fine - only other thing to check would be abs/vs non abs knuckle.

sure someone else can confirm

Welcome back
Have fixed the link so pic shows - you need to use the "BBCode" link from flickr.