Page 1 of 1
alloys ser 5 prelude
Posted: Fri Apr 12, 2013 2:03 pm
by Prelude402
my 2000 prelude has 4x114pcd and (I believe) 55mm offset and i'm finding it impossible to get 18inch alloys to fit without sticking out of the bodywork. any ideas?
Posted: Fri Apr 12, 2013 2:11 pm
by Merlin
Welcome to LG!!!
4x114? Is your car a 2.0? They are out there, example -
http://www.ebay.co.uk/itm/18-VOLVO-S40- ... 1e751f3c65
But 18's look too big on Ludes IMO.
Posted: Fri Apr 12, 2013 6:38 pm
by Supermarine Blues
Yup; 17"s are the biggest you'll need.
You might want to consider a 5-bolt conversion; loads of Hondas run a +55 offset for steering purity.
Posted: Fri Apr 12, 2013 6:42 pm
by rob quilter
As said....17's are better suited to Preludes.
Posted: Fri Apr 12, 2013 6:44 pm
by Pushki
Posted: Sat Apr 13, 2013 12:06 pm
by Prelude402
thanks guys, you've given me hope. might just try 17s
Posted: Sun Apr 14, 2013 8:51 am
by craig_jdm
i had 17s on my old 5g when i bought it and i thought they were too big 16 is perfect imo
Posted: Fri Apr 19, 2013 11:26 pm
by mills
welcome to LG
