Page 1 of 4

Steering Column Top Cowl Foul.

Posted: Fri Mar 28, 2014 10:08 am
by NafemanNathan
I'm having a bit of trouble with my new 5th gen's steering column top cowling. It's fowling on the underside of the dash/dial surround and not allowing the steering column to be raised fully. Hopefully you can see from these picture, where I tried to hold the camera in the same place...

This is it up as far as it will go with the top cowl on (The top cowl is pushing up on the underside of the dial surround)...

Image

This is it up as far as it will go mechanically without the cowl...

Image

Then this is it fully lowered with the top cowl on, but with the dial surround removed so you can see...

Image

And this is it raised with the top cowl on and it also fouls on the dash structure :? ...

Image

It's got me! I was hoping the 4th gen could come to my rescue again, but the 4th gen's is bigger still. (5th gen's on the right)...

Image

Image

the top corner of the cowling (The edge nearest the hole) fouls on the underside of the dial surround as well.

It's almost as if the steering column has rake adjustment as well and needs to be pulled out further.

Any ideas? :?

Does any one have a comparible picture of a top cowl they know fits?

Posted: Fri Mar 28, 2014 10:24 am
by Lude-dude
exploded diagram such as the lings site or manual might help shed some light on it

wrong bolt possibly?

not sure the actual cowling is wrong one

Posted: Fri Mar 28, 2014 10:29 am
by NafemanNathan
Even if I removed the bolts completely it still fouls on the the dash structure and the underside of the dials surround.

The problem is that edge on the cowl nearest the LED hole. If the edge was nearer the hole then it would clear everything. The cowl defintely pics up on the lower cowl perfectly though. It's as if the steering column needs to be lengthened towards me :?

Posted: Fri Mar 28, 2014 10:42 am
by Gayno
NafemanNathan wrote:It's as if the steering column needs to be lengthened towards me
Have you tried stroking and caressing it?! :lol:

Posted: Fri Mar 28, 2014 10:51 am
by NafemanNathan
I knew someone wouldn't be able to resist :lol:

Posted: Fri Mar 28, 2014 11:02 am
by Vtecmec
NafemanNathan wrote:It's almost as if the steering column has rake adjustment as well and needs to be pulled out further.
Or the dash is too far forward and needs to go back?

Posted: Fri Mar 28, 2014 11:15 am
by Lude-dude
the dash might be out slightly

Posted: Fri Mar 28, 2014 11:41 am
by NafemanNathan
I'll definitely check that.

Posted: Fri Mar 28, 2014 1:17 pm
by wurlycorner
Good idea about the dash - it's hardly as if it's escaped other 'successful' modifications, after all!!! :lol:

Posted: Fri Mar 28, 2014 1:29 pm
by NafemanNathan
wurlycorner wrote:it's hardly as if it's escaped other 'successful' modifications, after all!!! :lol:
Didn't quite follow this :oops: :?: