Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Jammed Seat Runner?

Inside your car, there is an interior. Talk about it here
User avatar
OEM+
Posts: 32
Joined: Wed Dec 18, 2019 9:55 pm
My Generation: 5G
Location: Reading
Has thanked: 17 times
Been thanked: 10 times

Jammed Seat Runner?

Post by OEM+ » Tue Mar 31, 2020 6:35 pm

Greetings, All!

Hope you're all staying safe during these lockdown days... seeing as I can't use the time to actually drive my 'lude, I'm attempting to use the time productively, fixing and tidying up anything that needs fixing or tidying.

I've already run into issues, though - my passenger seat base won't move back as far as the driver's seat. All other adjustments are fine. I've got the seat out of the car and, while the inner runner (with the lever mechanism on it) moves freely over the full length of adjustment, the outer runner does not... and I can't see why? I can't even move it far enough to give me access to the rear bolt so that I can remove it from the seat.

Is this a common fault? Something someone has resolved before? I've done a quick search but can't find anything on the subject, so - if anyone has any experience of this or ideas on how to fix it, I'm all ears... otherwise, tomorrow it'll be time for some percussive maintenance!
JayIG • 5th Gen 2.2VTi 2WS Auto • 91k

User avatar
km666
Posts: 131
Joined: Mon May 06, 2019 1:07 pm
My Generation: 5G
PSN GamerTag: fargoneonone
Location: Devon
Has thanked: 56 times
Been thanked: 15 times

Jammed Seat Runner?

Post by km666 » Tue Mar 31, 2020 7:43 pm

Sounds like a physical obstruction. Have you checked for any little stones or anything? A dent to the rail?
-KM666

User avatar
vanzep
Supporter 2016
Posts: 6960
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 251 times
Been thanked: 390 times

Jammed Seat Runner?

Post by vanzep » Wed Apr 01, 2020 11:09 am

only thing i can say is that on 4th gens the seats can be a bit tough to put them back or forwards
i would check the release arm is working ok and spray some silicone based spray on the runners and leave it for a day and try again :)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
OEM+
Posts: 32
Joined: Wed Dec 18, 2019 9:55 pm
My Generation: 5G
Location: Reading
Has thanked: 17 times
Been thanked: 10 times

Jammed Seat Runner?

Post by OEM+ » Wed Apr 01, 2020 12:26 pm

km666 wrote:
Tue Mar 31, 2020 7:43 pm
Sounds like a physical obstruction. A dent to the rail?
Think you're on to something, there.

Runner seems clear of foreign obstructions and moves freely otherwise, but I've discovered a point on the lower part of the rail that's been neatly 'punched' upwards - the little raised area created is what fouls against the bearing and stops the runner moving.

I understand why this has been done, but am curious if it's been done in the right place!
JayIG • 5th Gen 2.2VTi 2WS Auto • 91k

User avatar
nitin_s1
Posts: 10455
Joined: Tue Aug 03, 2010 1:09 pm
My Generation: 5G
PSN GamerTag: N171N
Location: London
Has thanked: 133 times
Been thanked: 113 times
Contact:

Jammed Seat Runner?

Post by nitin_s1 » Wed Apr 01, 2020 2:49 pm

I had a similar problem with my aftermarket ones. Turned out that while I took them out to change to red SiR carpet, one of the teeth got bend and it prevented me from moving forward/backwards. Was an easy fix. :thumbup:

User avatar
OEM+
Posts: 32
Joined: Wed Dec 18, 2019 9:55 pm
My Generation: 5G
Location: Reading
Has thanked: 17 times
Been thanked: 10 times

Jammed Seat Runner?

Post by OEM+ » Wed Apr 01, 2020 7:20 pm

That's a good call - and it was certainly one of the first things I checked for, thinking the adjustment mechanism itself might be at fault - but everything in that department is working fine, so no easy fix for me just yet.

Still unable to dismantle the runner in order to take it off the seat base today, I did find a really bright torch to peer down the runner with. I think I can safely say that the centre roller/bearing thing has come adrift. Despite not being where it should be, it's somehow still allowing free movement of the runner - but that's what seems to be fouling the indentation on the runner and leaving me with only a few inches of travel.

So, I'm now scouring the internet for a component diagram of the runner so I can know for sure. Or, a replacement runner. ;)
JayIG • 5th Gen 2.2VTi 2WS Auto • 91k

Andyjess666
Posts: 661
Joined: Thu Dec 29, 2016 5:26 pm
My Generation: 5G
Been thanked: 57 times

Jammed Seat Runner?

Post by Andyjess666 » Wed Apr 01, 2020 9:42 pm

@lankysod would have a replacement mate

User avatar
Lankysod07
Posts: 744
Joined: Mon Oct 13, 2014 10:50 am
My Generation: 5G
XBOX GamerTag: Tumber07
Location: Chandler's Cross, Rickmansworth
Has thanked: 13 times
Been thanked: 10 times

Jammed Seat Runner?

Post by Lankysod07 » Thu Apr 02, 2020 10:32 am

Andyjess666 wrote:
Wed Apr 01, 2020 9:42 pm
@lankysod would have a replacement mate
Yeah I've got one if you need one bud 8)

User avatar
OEM+
Posts: 32
Joined: Wed Dec 18, 2019 9:55 pm
My Generation: 5G
Location: Reading
Has thanked: 17 times
Been thanked: 10 times

Jammed Seat Runner?

Post by OEM+ » Tue May 05, 2020 11:31 pm

@Lankysod07 to the rescue!

All sorted - it took a hacksaw to persuade my knackered runner to finally part company with the seat base, but only a couple of minutes to get the replacement runner fitted and the seat bolted back in my car... my taller passengers will be well chuffed to now have the full amount of legroom. ;)

Many thanks to Lankysod07 for taking time out of his busy workday to arrange a smooth social-distancing transaction, and for sorting a few extra clips and bits to keep me busy as lockdown continues!
JayIG • 5th Gen 2.2VTi 2WS Auto • 91k

User avatar
Lankysod07
Posts: 744
Joined: Mon Oct 13, 2014 10:50 am
My Generation: 5G
XBOX GamerTag: Tumber07
Location: Chandler's Cross, Rickmansworth
Has thanked: 13 times
Been thanked: 10 times

Jammed Seat Runner?

Post by Lankysod07 » Tue May 05, 2020 11:35 pm

You are very welcome buddy, glad we could get you sorted with the bits you needed :D

Sorry it was so distanced and that I had to rush back to work but I'm sure we'll catch up again at some point.

Take care bud!

Post Reply

Return to “Interior”