Aftermarket bucket seat subframe
Posted: Thu Oct 18, 2012 5:30 am
Are there any off the shelf subframes available for the 5th gen or is it a case of going custom ?
Lude Generation
The UK Honda Prelude Club
https://www.ludegeneration.co.uk/
Aftermarket bucket seat subframe
Page 1 of 2
Posted: Thu Oct 18, 2012 8:58 am
Cant you just use a standard seat rail and attach that to your seat?
Posted: Thu Oct 18, 2012 1:15 pm
I cut off the standard seat fixing points & used them with some flat 4mm thick steel bars from b&q.
It's much sturdier than the OMP one I had in my 'teg.
It's much sturdier than the OMP one I had in my 'teg.
Posted: Thu Oct 18, 2012 1:35 pm
Posted: Thu Oct 18, 2012 2:01 pm
I got a welder to weld my Evo Recaro seat for me for £50. But it was stuck in one position with no movement so I had to carefully select my driving position.
Posted: Thu Oct 18, 2012 2:14 pm
^^ Thats an MOT failure with the new rules.
Posted: Thu Oct 18, 2012 3:32 pm
I don't have it no more.Merlin wrote:^^ Thats an MOT failure with the new rules.
Posted: Thu Oct 18, 2012 4:03 pm
hmm pricey. annoying that seats dont have standard bolt positions aswell
Posted: Thu Oct 18, 2012 4:33 pm
the rails for my brides are 300 each 
Posted: Thu Oct 18, 2012 4:52 pm
Indeed they are - got a pair in my lude. Not seen another set around to be fair.
Would definietly be easier and cheaper to take new seats and lude to a local fabricator and get them to knock something up. What I nearly did before getting the Brides second hand for a good price.
Would definietly be easier and cheaper to take new seats and lude to a local fabricator and get them to knock something up. What I nearly did before getting the Brides second hand for a good price.