Page 1 of 1
window switch panel
Posted: Fri Jan 04, 2013 2:43 pm
by allkiller
Just wondering does the panel trim around where the window switches in the door are just pull off like the radio surround ?? ( carbon look bit in picture)
only i dont want to break anything especially plastic when its cold...or do you need to pull the door panel off first ??
thanks
image sharing
Posted: Fri Jan 04, 2013 5:29 pm
by mills
i think there may be a couple of screws underneath that you have to take out 1st. ive got a set that i can check to make sure though
Posted: Fri Jan 04, 2013 6:37 pm
by vanzep
there is definately one in the middle of it - you can see the plastic flap/screw head cover - pop that up and undo the screw underneath it and it should come off
Posted: Fri Jan 04, 2013 9:09 pm
by mercutio
you have to take the door panel off buddy there are a couple of screws you can only get to from the back
Posted: Sat Jan 05, 2013 1:01 pm
by Donald
Plus the plugs for the switches.
Posted: Sun Jan 06, 2013 8:40 pm
by allkiller
Cheers Merc ...saved snapping anything off
Posted: Sun Jan 27, 2013 1:10 pm
by Nik_L
Glad i found this thread, was about to pull them off as normally they are just clipped in place (albeit with the 1 screw you can see under the flap).