Page 6 of 7
Mika the JDM 2016 Honda S660 - Build starts on page 2
Posted: Sun Jun 09, 2019 11:29 pm
by nitin_s1
Sexy
Mika the JDM 2016 Honda S660 - Build starts on page 2
Posted: Tue Aug 06, 2019 6:04 pm
by RattyMcClelland
Mika the JDM 2016 Honda S660 - Build starts on page 2
Posted: Tue Aug 06, 2019 6:11 pm
by RattyMcClelland
Mika the JDM 2016 Honda S660 - Build starts on page 2
Posted: Tue Aug 06, 2019 6:28 pm
by RattyMcClelland
Onto some more modifications.
A simple of. A baffled, filter oil catch can. Blue PCV valve to the catch can which is hidden at the back near the exhaust and back to the plastic intake manifold.
Back in early June i put a huge HKS/Spoon parts order with Torque GT and this week in August they finally arrived so ill go through these one by one as i install them over the next several weeks.
First up the HKS flash editor. Very simple. It flashed the ECU with a HKS remap, removes the speed limiter and store the stock ECU data on the flash editor. The remap is more of a driveability remap and but gives a few more hp but more importantly it smoothens the power curve and holder power longer.
Top speed it now 110mph.
Around 70bhp and 80lbft. It plugs into the OBD2 port, i also installed HKS M45HL one stage colder spark plugs as recommended by HKS. THis is all in preparation for the GT100R uprated turbo kit that ill do another time once i have saved my pennies.
Spoon Steering stiff plates.
I didnt get a picture of the items but my ginger cat is sniffing them in the above picture. They are a pair of small triangular boomerang shaped high tensile pressed steel supports. The stock S660 steering gearbox is only attached the the subframe via 2 bolts so upon hard cornering they can move and transmit and uneven steering response. The Spoon steering stiff plate take those simple 2 bolts and turns them into a full 4 support and bolts direct to the chassis. It might be a placibo but steering on hard corners and roundabouts feels more natural and even. Maybe less movement but hard to say.
It was a pain to install. So tight on that passenger side.
Before
After
You use their Rigid color with copper grease.
Mika the JDM 2016 Honda S660 - Build starts on page 2
Posted: Tue Aug 06, 2019 8:09 pm
by nitin_s1
Mika the JDM 2016 Honda S660 - Build starts on page 2
Posted: Tue Aug 06, 2019 8:23 pm
by toadster
Lo
Very NICE
Great work
Cheers
Toadster
Mika the JDM 2016 Honda S660 - Build starts on page 2
Posted: Wed May 26, 2021 8:33 pm
by RattyMcClelland
Mika the JDM 2016 Honda S660 - Build starts on page 2
Posted: Wed May 26, 2021 8:47 pm
by RattyMcClelland
Mika the JDM 2016 Honda S660 - Build starts on page 2
Posted: Wed May 26, 2021 8:55 pm
by Greg
Nice, it looks like a fun car! I like...
Mika the JDM 2016 Honda S660 - Build starts on page 2
Posted: Wed May 26, 2021 8:59 pm
by RattyMcClelland