Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Abs 1-2 error code
- c_doughty1
- Supporter 2014
- Posts: 907
- Joined: Mon Jul 22, 2013 6:35 pm
- My Generation: 4G
- Location: Edwinstowe, Nottinghamshire
- Been thanked: 2 times
Abs 1-2 error code
Ok the story so far.....I've replaced the abs pump and motor with a new one that has been reconditioned and woop woop the abs light is off.
Now the bad news when I set off driving as soon as I hit the brakes the abs light comes back on. Code 1-2 again grrrrr!
Could it be a dirty abs sensor? Or should I just kill my self as the abs pump has been in and out now twice and if it has to come back out again I may cry.
Help
Now the bad news when I set off driving as soon as I hit the brakes the abs light comes back on. Code 1-2 again grrrrr!
Could it be a dirty abs sensor? Or should I just kill my self as the abs pump has been in and out now twice and if it has to come back out again I may cry.
Help
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21223
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1967 times
- Been thanked: 240 times
- c_doughty1
- Supporter 2014
- Posts: 907
- Joined: Mon Jul 22, 2013 6:35 pm
- My Generation: 4G
- Location: Edwinstowe, Nottinghamshire
- Been thanked: 2 times
Re: Abs 1-2 error code
To test motor relay, motor fuse and unit fuse....this I'll do tomorrow if I get time.
The abs motor and pump was reconditioned at a place near to where I live.
I'm just getting massively frustrated.
The abs motor and pump was reconditioned at a place near to where I live.
I'm just getting massively frustrated.
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21223
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1967 times
- Been thanked: 240 times
- c_doughty1
- Supporter 2014
- Posts: 907
- Joined: Mon Jul 22, 2013 6:35 pm
- My Generation: 4G
- Location: Edwinstowe, Nottinghamshire
- Been thanked: 2 times
Re: Abs 1-2 error code
I dunno....cleaned it I guess lol. I'll check those things tomorrow but fingers crossed
- uberNoobZA
- Posts: 430
- Joined: Mon Feb 22, 2016 2:49 pm
- My Generation: 4G
- Location: Oxford / Sanctuary / Azeroth
- Has thanked: 17 times
- Been thanked: 14 times
- c_doughty1
- Supporter 2014
- Posts: 907
- Joined: Mon Jul 22, 2013 6:35 pm
- My Generation: 4G
- Location: Edwinstowe, Nottinghamshire
- Been thanked: 2 times
Re: Abs 1-2 error code
Do you have a current mot?uberNoobZA wrote:interested in how you get on... Mine is also showing 1-2
- uberNoobZA
- Posts: 430
- Joined: Mon Feb 22, 2016 2:49 pm
- My Generation: 4G
- Location: Oxford / Sanctuary / Azeroth
- Has thanked: 17 times
- Been thanked: 14 times
- c_doughty1
- Supporter 2014
- Posts: 907
- Joined: Mon Jul 22, 2013 6:35 pm
- My Generation: 4G
- Location: Edwinstowe, Nottinghamshire
- Been thanked: 2 times
Re: Abs 1-2 error code
Maybe worth investigating it pre new mot, error 1-2 is ABS pump motor circuit problem. You may have a fuse gone or a damaged wire maybe....I had 1-2 now I think we're all sorted I just have air in abs motor pump so I need to bleed it.uberNoobZA wrote:Yupc_doughty1 wrote: Do you have a current mot?
- uberNoobZA
- Posts: 430
- Joined: Mon Feb 22, 2016 2:49 pm
- My Generation: 4G
- Location: Oxford / Sanctuary / Azeroth
- Has thanked: 17 times
- Been thanked: 14 times