Must say there was some knocking from the near too, which seems to have cured itself, so i'm well chuffed
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Replacing Anti Roll Bar Bushes
-
Kawa
- Posts: 3404
- Joined: Sun Jun 20, 2010 5:58 pm
- My Generation: 4G
- XBOX GamerTag: kawa222
- Location: Nottingham
- Contact:
Replacing Anti Roll Bar Bushes
Honda told me that one of my rear ARB bushes was knackered 18 months ago
Must say there was some knocking from the near too, which seems to have cured itself, so i'm well chuffed
Must say there was some knocking from the near too, which seems to have cured itself, so i'm well chuffed
-
Kawa
- Posts: 3404
- Joined: Sun Jun 20, 2010 5:58 pm
- My Generation: 4G
- XBOX GamerTag: kawa222
- Location: Nottingham
- Contact:
Thanks to jozefsan 
for pointing out that the inner surface of the ARB bush can/should(?) be filled with normal CV type grease.
The top pitcure shows the front ARB bushes (as stated) and the rest of the pictures refer to the rear ARB bushes being fitted. Note, the fitting is near enough identical both ends
for pointing out that the inner surface of the ARB bush can/should(?) be filled with normal CV type grease.The top pitcure shows the front ARB bushes (as stated) and the rest of the pictures refer to the rear ARB bushes being fitted. Note, the fitting is near enough identical both ends