@Vtecmec I am glad you cleared that up. I was reading the write up and was like "WTF surely you don't measure it under the jam nut".
Where you show is where the service manual says to measure it at as well.
Anyone who has done this in mm, what did you set it to?
When measured in inches there is much less margin for choice, for example exhaust is 0.007-0.008in so really you shove a 0.007in gauge in there and go with that. I will be using gauges that are in mm, so I have the choice of 0.17, 0.18, 0.19, 0.20 and 0.21mm gauges.
I am being told by Prelude racers that 0.17mm - 0.18mm is better for increased lift & duration.
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<