Page 1 of 1
Wiring help 5th gen auto to manual using manual ecu with auto harness
Posted: Fri Apr 07, 2023 8:05 am
by Luder850
Can't get it to turn over but when i crossover the starter it will crank but wont start. Not sure about clutch pedal wiring
Wiring help 5th gen auto to manual using manual ecu with auto harness
Posted: Fri Apr 07, 2023 9:28 am
by Vtecmec
What have you done with the wiring where the gear selector used to be?
Wiring help 5th gen auto to manual using manual ecu with auto harness
Posted: Thu Apr 13, 2023 2:45 pm
by wurlycorner
On an Auto, the circuit looks to check that the shift selector is in either Park or Neutral.
On a Manual, the circuit looks to check that you have the clutch pedal depressed (according to the US manual at least...).
Section 4-3 of the service manual.
Vtecmec's question is the key one - what wiring changes have you made as part of the swap from auto to manual?