Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

4th & 5th ES Master Set and Trailing Arm Polybush Guide

As much of the Lude knowledge we have in one handy place
User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Tue Apr 05, 2016 2:35 pm

Merlin wrote:For UK and JDM 5th gens without ATTS, the 92-96 Master Set can be used however the front upper arm bushings are different. You have to buy the Type-SH front upper control arm bushes (part number - 81204).
Well that little nugget of information is wrong! :facepalm:

81204 are these

Energy Suspension's equivalent are these, which are what I order and just received after waiting for over 2 months!

When really what I should have ordered are these...

http://www.energysuspensionparts.com/16.3119

:suicide:

The 81204 part number taken from the OP refers to them as "Front Strut Arm Bushings" on that webpage, which is why I thought they sounded right, however they are certainly Front Strut (Radius) Rod Bushings!

Fortunately I still need them. They are different to on a 4th gen (I've since found out), but now I'm going to have to wait another small lifetime before receiving the Upper front arm bushes :roll:

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

Post by Merlin » Tue Apr 05, 2016 2:46 pm

ok sorry for that. What you are saying that the 81204 is the equivalent of the 2295 in this pic?

Image


And you are after the equivalent of 2280 in this pic?

Image
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

Post by Merlin » Tue Apr 05, 2016 2:46 pm

I have updated the first post.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Tue Apr 05, 2016 2:55 pm

Nope, the 81204 (or better call it 16.7108 to keep it all Energy Suspension) are the 5th gen equivalent of 7096 & 7097 in this pic...

Image

Seen fitted here.

I didn't think there was a difference for this bush between a 4th gen and 5th gen. I thought the front cross member was the same... Unless this bush is the difference between a regular 5th and a Type-S :?: :?: :?: :?: :?:

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

Post by Merlin » Tue Apr 05, 2016 3:03 pm

Ahhh I get you.

You are correct, regular non-ATTS Ludes have the same radius rod bushings as the 4th gen. Only the SH and Type-S are different.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Tue Apr 05, 2016 3:07 pm

So these bushes I've bought and received are no good then? :facepalm:

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Tue Apr 05, 2016 3:09 pm

@4thgenphil are you going to need them with your Type-S front end mods?

It's these bushes, but Energy Suspension Black...

http://www.energysuspensionparts.com/in ... /17416.pdf

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

Post by Merlin » Tue Apr 05, 2016 3:11 pm

Yeah they are the wrong thing :(

ES's description of the parts are crap, that is why I did the diagrams for the 4th gen. But obviously I got the wrong part number for the 5th gen.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Tue Apr 05, 2016 3:16 pm

That's ok. I already have the 4th gen ones, which is what I thought I needed to use for the radius rod ends. If Phil doesn't want them then I'm sure I'll be able to flog them on eBay (Selling point... They're in stock ;) :lol: )

User avatar
4thgenphil
Supporter 2016
Posts: 6660
Joined: Tue Aug 03, 2010 4:15 pm
My Generation: 4G
Location: filming two girls one cup 2
Has thanked: 5 times
Been thanked: 25 times

Post by 4thgenphil » Tue Apr 05, 2016 6:20 pm

NafemanNathan wrote:@4thgenphil are you going to need them with your Type-S front end mods?

It's these bushes, but Energy Suspension Black...

http://www.energysuspensionparts.com/in ... /17416.pdf
Ffs yes i did, i dont now though. If no one else wants or need eme though
:thumbdown:

Post Reply

Return to “Guides / How to's / Tech Section”