Lude Generation

This guide is for the 92-96 Master Set and Trailing Arm Set.


For UK and JDM 5th gens without ATTS, the 92-96 Master Set can be used however the front upper arm bushings are different. You have to buy the Type-SH front upper control arm bushes (part number - 16.3119).




The instructions that come with the Master Kit and Trailing Arm sets are a bit pap and its hard to figure out where everything goes. Here is the location with part numbers where each polybush goes:

NOTE - There are no polybushes for the rear 2WS toe arms. These are not present on 4WS cars anyway.

Front

16.3106 - Front end control arm bushing


16.7103 - Radius rods (called front strut rod set in the parts list)


16.8106 - Front shock bushing





Rear

16.3112 - Rear control arm bushing


16.8108 - Rear shock bushing




16.7105 - Rear trailing arm bushing


The bump stops and coil spring isolators are fairly self explanatory. All bushing shells must be removed except the big trailing arm.

awesome

Someone already added a wiki link

It was meeeeeeee

okee i hope some one understand me because i've a little issue


The trailing arm bushing is to small to fit the trailing arm!?!?!?

i've put the 3326 rubber in the trailing arm but is way to small check pics





Now i have a total of 4 round rubbers the fit nicly on the 3326 rubber
but how do you fit it on the trailing arm?

it looks like jobby



the 4 rings have the numbers

2 times 6133 and 2 times 6143

is this right? help please

nobody???

Pics are not working chap.

@Ferdie Yup the pics do not work for us.

Ferdie wrote:i've put the 3326 rubber in the trailing arm but is way to small check pics

The bush is too small to stay in the hole? Have you removed the "shell" in the trailing arm?

Sorrry people

problem is allready fixt!

thanks anyway

What was the problem?