andyconnollys '98 S-Spec

andyconnolly · Post by **andyconnolly** » Sat Oct 18, 2014 9:19 pm

Mine wasn't obvious where it was coming from
My pal Sean has just bought a 5th Gen and had a spare radiator with it so my radiator ordeal is sorted for now

andyconnolly · Post by **andyconnolly** » Sun Oct 19, 2014 4:20 pm

Radiator changed out today and had the car a spin temp staying just below half way on the dial

feels good to get it moving again after a few weeks even better when it had a full tank in it

andyconnolly · Post by **andyconnolly** » Fri Feb 27, 2015 5:06 pm

Can anyone recommend a tuner ?

Already contacting some body shops to get the outside sorted so now for the engine

Been quoted £80 to fit the intake and TB and then £300 for custom map and power runs at triple H tuning.
I need to get to the bottom of the oil leak aswell if anyone has any ideas, it's only a few drops every so often when the oils just been topped up. Feel a bit hesitant to go ahead with the engine mods till I find exactly where the oil leak is from.

Post by **RattyMcClelland** » Fri Feb 27, 2015 5:09 pm

£300 to remap....does this include an ecu and harness. That's alone is £400 from my tuner.

andyconnolly · Post by **andyconnolly** » Fri Feb 27, 2015 5:16 pm

I will have the p28 ECU with hondatas300
So I take it that was the full price he gave me

andyconnolly · Post by **andyconnolly** » Fri Feb 27, 2015 5:16 pm

The ecu will be from H-Tune

Post by **RattyMcClelland** » Fri Feb 27, 2015 5:23 pm

Its about £100+vat per hour to remap and it on average 3 hours work so £300 to remap is fine. And around £500 for the Hondata S300 from H-tune. So £800 in total. Mine is £850 all in. This includes p28 on neptune, harness and fitting and a forced induction remap.

andyconnolly · Post by **andyconnolly** » Fri Feb 27, 2015 5:32 pm

That sounds reasonable then

Just need to sort the oil leak and that's me
Wish I could go forced induction

andyconnolly · Post by **andyconnolly** » Sun Aug 02, 2015 8:26 pm

well not been on in a while and life for the lude is in a sticky situation !
needs an engine rebuild seriously burning oil and misfiring

wont even move or start without a constant cloud of smoke and exhasut pops

No longer have the money nor the time to fix it and cant keep it in the parents drive way forever so i have no clue what to do with it

On the plus new job as a service engineer on the CNC machines

and have a new daily driver

Aud A6 S-Line Ultra

mercutio · Post by **mercutio** » Sun Aug 02, 2015 8:32 pm

nice daily pity they tend to be driven by knobs

well you can either break it or sell it as it stands

Lude Generation

andyconnollys '98 S-Spec

Re: andyconnollys '98 S-Spec

Re: andyconnollys '98 S-Spec

Re: andyconnollys '98 S-Spec

Re: andyconnollys '98 S-Spec

Re: andyconnollys '98 S-Spec

Re: andyconnollys '98 S-Spec

Re: andyconnollys '98 S-Spec