Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
A1ex's 5th gen - The Filthy LSD Mugeny Beast - Rear ended
A1ex's 5th gen - The Filthy LSD Mugeny Beast - Rear ended
Thought it was time I got my profile sorted considering the money I've spent on it!
So I bought my current lude last September, standard UKDM VTi with 92k on the clock and a full honda service history and the standard interior.
The only 'mods' to the car were an aftermarket exhaust with a rattling back box & a spray paint red rocker cover which was sprayed in the engine bay
Anyhow, it look like this but with out the spoiler;
So the first thing I did after getting the car was start putting in the parts I'd been collecting over 3 previous years of ownership so within a couple weeks she looked like this;
About a month after the car purchase a mugen mani, decat and evo 2 zorst came up for sale which I had to have! and this ended up on the car, unfortunately don't have any pics of this
A few more things to follow;
The wish list -
Jun cams, Mahle gold pistons, big TB & more PAW tuning ( I want 270bhp )
The to make list -
As you all know I'm partial to a bit of CF a few of the parts on route; mugen spoiler, bonnet spoiler, sunroof plug / complete roof skin. The mugen spoiler is moulded and bonnet spoiler is being done in the next wek or so with a vacuum pump on the way too
So I bought my current lude last September, standard UKDM VTi with 92k on the clock and a full honda service history and the standard interior.
The only 'mods' to the car were an aftermarket exhaust with a rattling back box & a spray paint red rocker cover which was sprayed in the engine bay
Anyhow, it look like this but with out the spoiler;
So the first thing I did after getting the car was start putting in the parts I'd been collecting over 3 previous years of ownership so within a couple weeks she looked like this;
About a month after the car purchase a mugen mani, decat and evo 2 zorst came up for sale which I had to have! and this ended up on the car, unfortunately don't have any pics of this
A few more things to follow;
The wish list -
Jun cams, Mahle gold pistons, big TB & more PAW tuning ( I want 270bhp )
The to make list -
As you all know I'm partial to a bit of CF a few of the parts on route; mugen spoiler, bonnet spoiler, sunroof plug / complete roof skin. The mugen spoiler is moulded and bonnet spoiler is being done in the next wek or so with a vacuum pump on the way too
Last edited by A1ex on Tue Apr 16, 2013 6:03 pm, edited 18 times in total.
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuild :)
So after much saving, planning (thank you Rich) and lab ratting the lude went in for some work;
hondata S300 & p28
type s intake with K&N panel filter
ATR TB, IM, Injectors, head & cams (fully rebuilt head)
Mugen mani
decat
evo2 exhaust
and some ATR brake fitting
and the results;
hondata S300 & p28
type s intake with K&N panel filter
ATR TB, IM, Injectors, head & cams (fully rebuilt head)
Mugen mani
decat
evo2 exhaust
and some ATR brake fitting
and the results;
Last edited by A1ex on Wed Jun 20, 2012 10:36 pm, edited 1 time in total.
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
New interior & near miss
So, oil pump packs in. PAW & my dad (with some towing) save the day
Before this I got some new carpet from slashdot and put an oil pressure gauge in (for obvious reasons);
Before this I got some new carpet from slashdot and put an oil pressure gauge in (for obvious reasons);
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
CDA BMC installed
Last edited by A1ex on Wed Jun 20, 2012 10:13 pm, edited 1 time in total.
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
CF cooling plate
Good project this one, big thank you to LLL for making the mould and supplying the perspex
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
CF CAI installed & resonator removed
This took a lot of tinkering to get the air feed path right, but got there in the end
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
new wheels, suspension & eyebrows (busy week)
Again, big thank you to LLL for this one. Came over to help change the suspension (did most of the work)including supplying said suspension in exchange for some CF goodness.
Happy owner of some JDM tein basics
Also put some smaller wheels (still don't know what wheels) on the car to tighten up the gear ratios and lower it a bit further
Tight fit over the brakes
Happy owner of some JDM tein basics
Also put some smaller wheels (still don't know what wheels) on the car to tighten up the gear ratios and lower it a bit further
Tight fit over the brakes
Last edited by A1ex on Wed Jun 20, 2012 10:46 pm, edited 1 time in total.
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
CF rad mounts & Ratty rocker cover installed
After seeing Rattys spray work on Seans green rocker at JF I had to get one in my engine bay which was looking a mess by comparison. Saw a sexy blue NSX at JF and decide that was the colour for me
After some handy spray work from Ratty and some very very very careful nut tightening I had this;
With the before
and after
It looks soooooooo much better!
Also got my home made rad mounts in;
which came in at a 1/10 of the weight of the OEM ones
After some handy spray work from Ratty and some very very very careful nut tightening I had this;
With the before
and after
It looks soooooooo much better!
Also got my home made rad mounts in;
which came in at a 1/10 of the weight of the OEM ones
Last edited by A1ex on Wed Jun 20, 2012 10:47 pm, edited 1 time in total.
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
Re: A1ex's 5th gen - The Filty Beast
I think some will be painted and some wont. There are sooo many parts I want to make I think the car would look a bit strange being made form ALL CF.
I was staring at the rear arches the other day thinking to myself, they'd be easy to mould, but scared shitless about cutting the old arches out and putting the now ones in
I was staring at the rear arches the other day thinking to myself, they'd be easy to mould, but scared shitless about cutting the old arches out and putting the now ones in
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K