Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Type s p5p ecu pin out required

No, not in the key of C. An H is likely involved though ...
Post Reply
User avatar
106pete
Posts: 1139
Joined: Wed Dec 01, 2010 9:38 am
My Generation: 4G
Location: Cornwall
Been thanked: 1 time

Type s p5p ecu pin out required

Post by 106pete » Sun Sep 28, 2014 8:44 am

I'm goin to fit an apaxi avfc to a prelude type s p5p ecu and need to know what wire is what so any information would be great but a pin out of the ecu fully labled would be perfect :)

I have seen pin outs for obd2 p13s are they the same just without the atts plug?
236bhp and 170ft/lb stock :whistle:

User avatar
RattyMcClelland
Moderator
Posts: 9191
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 181 times

Post by RattyMcClelland » Sun Sep 28, 2014 10:32 am

See if you can download the prelude jrsc installation manual. At the back I'm sure there Is a labelled diagramto install the Jackson ems.
Might help.
Image

User avatar
106pete
Posts: 1139
Joined: Wed Dec 01, 2010 9:38 am
My Generation: 4G
Location: Cornwall
Been thanked: 1 time

Post by 106pete » Sun Sep 28, 2014 12:50 pm

Just looked through it and it's only showing a few connections and they aren't the ones I wanted unfortunately.
236bhp and 170ft/lb stock :whistle:

User avatar
RattyMcClelland
Moderator
Posts: 9191
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 181 times

Post by RattyMcClelland » Sun Sep 28, 2014 4:01 pm

What about the greddy emanage ultimate manual. Loads if diagrams at the back.
Image

Post Reply

Return to “Tuning”