Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

H22A5 with H22A7 parts

No, not in the key of C. An H is likely involved though ...
Vtecbg
Posts: 19
Joined: Thu Jul 03, 2014 5:58 pm
My Generation: 5G

H22A5 with H22A7 parts

Post by Vtecbg » Mon Apr 13, 2015 10:26 pm

I will get some parts as a gift from a best friend. All parts are from ATR H22A7 accord. There is camshafts, pistons for compression ratio 11:1, exhaust manifold and ported and polish 70mm throttle body. After installing these parts, i will buy P28 ECU and tune it. Only thing that I will not get is the intake manifold, which is more important.

Is there anybody that have similiar setup and what power I can expect?
Last edited by Vtecbg on Tue Apr 14, 2015 7:18 pm, edited 1 time in total.

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21205
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1929 times
Been thanked: 236 times

Post by wurlycorner » Tue Apr 14, 2015 12:03 am

@H10ndr had a very similar setup to that, I think.

:think: other than that, not sure who else on here has an A7, think they're mainly A8 based? :?

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

Post by Merlin » Tue Apr 14, 2015 9:08 am

70mm throttle body will be overkill IMO, maybe even too big. You shouild get the intake manifold too.

If you get all that installed, plus any accompanying mods, I think you will be in the 225-230 bhp range.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
MaccaIRL
Posts: 773
Joined: Mon Dec 01, 2014 9:04 pm
My Generation: 5G
XBOX GamerTag: MaccaIRL
Location: Belfast

Re: H22A5 with H22A7 parts

Post by MaccaIRL » Tue Apr 14, 2015 10:44 am

Merlin wrote:70mm throttle body will be overkill IMO, maybe even too big. You shouild get the intake manifold too.

If you get all that installed, plus any accompanying mods, I think you will be in the 225-230 bhp range.
Doesnt the exhaust manifold need modified to fit?

Same with the intake mani?
Lude-behaviour!

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

Post by Merlin » Tue Apr 14, 2015 10:53 am

The ATR exhaust manifold is not a direct fit as one of the front cross members needs to be notched. The ATR exhaust manifold is not a huge improvement anyway. It is reportedly double skinned and the ID of the inner skin is not much of an improvement over the standard Lude one.

The intake manifold is certainly a performance upgrade over the standard Prelude one.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Tue Apr 14, 2015 11:05 am

wurlycorner wrote: :think: other than that, not sure who else on here has an A7, think they're mainly A8 based? :?
:think:

Vtecbg
Posts: 19
Joined: Thu Jul 03, 2014 5:58 pm
My Generation: 5G

Post by Vtecbg » Tue Apr 14, 2015 8:02 pm

Thank you for informations.
What about the down pipe, can I use my H22A5?

The intake manifold is direct fit?

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21205
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1929 times
Been thanked: 236 times

Post by wurlycorner » Tue Apr 14, 2015 8:52 pm

NafemanNathan wrote:
wurlycorner wrote: :think: other than that, not sure who else on here has an A7, think they're mainly A8 based? :?
:think:
:think:
Actually... Merlin's track car is A7 based?
Whereas bennyboy is A8 based, was my thinking... A lot of the others are just A's with minor mods (A8 cams etc.)?
Then I run out of ludes that are running modified engines (running being the important words - the several builds in progress don't count, obviously because they have no bhp or tuning figures yet!!!)
(There are probably several more and I've just missed them because my memory is jobby!) :D

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

Post by Merlin » Tue Apr 14, 2015 9:13 pm

I am H22a. With the work that is needed to put those bits on it doesn't really matter what engine you have.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

newkid
Supporter 2016
Posts: 2665
Joined: Thu Feb 23, 2012 8:28 pm
My Generation: 4G
PSN GamerTag: spaz_ma_taz
Location: Edinburgh
Has thanked: 13 times
Been thanked: 50 times

Post by newkid » Tue Apr 14, 2015 9:37 pm

wurlycorner wrote:
NafemanNathan wrote:
wurlycorner wrote: :think: other than that, not sure who else on here has an A7, think they're mainly A8 based? :?
:think:
:think:
Actually... Merlin's track car is A7 based?
Whereas bennyboy is A8 based, was my thinking... A lot of the others are just A's with minor mods (A8 cams etc.)?
Then I run out of ludes that are running modified engines (running being the important words - the several builds in progress don't count, obviously because they have no bhp or tuning figures yet!!!)
(There are probably several more and I've just missed them because my memory is jobby!) :D
Naths is a7 of the 5th gen, think thats what he was hinting at wurly :lol:

Post Reply

Return to “Tuning”