Page 1 of 1
Skunk2 Alpha + Pro series?
Posted: Mon May 02, 2016 4:03 pm
by Therealjj91
I've currently got Alpha series valve springs and retainers fitted in my car and in the future I want to upgrade from the type s cams to skunk2 pro cams. My question is what is the difference between alpha and pro series springs and retainers and what cams are recommended for a high compression engine pro1s or pro2s or even the crower ones?
Posted: Mon May 02, 2016 4:40 pm
by farlow
Depends how high ?
Posted: Mon May 02, 2016 4:49 pm
by Therealjj91
I've got the mahle gold series 11.5.1 Pistons in.
Posted: Mon May 02, 2016 5:08 pm
by mercutio
Crower cams have supposedly improved their quality pro2's are supposed to be insane
pro1's are supposed to be pretty good but it all depends on what your power levels your looking for and how deep your pockets are and also how much you value drivablity
check out the specs on the cams some are not just plug and play some may require work to the pistons
Posted: Mon May 02, 2016 5:20 pm
by Therealjj91
Yeah that's the thing, I've already spent out on the alpha valve train stuff and I don't want to have to change it out for the pro stuff cause it's hardly been used. If I can run the pro2s on the alpha valve train parts I'll probably do that.
.
Posted: Mon May 02, 2016 5:22 pm
by mercutio
not just that some will require the pistons pocketing
Posted: Tue May 03, 2016 1:57 pm
by Drax
i think the alpha series springs and retainers are fine for n/a builds, whereas the pro series springs and retainers are aiming for forced induction setups.