Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Tuning

No, not in the key of C. An H is likely involved though ...
Post Reply
Rikmister
Posts: 132
Joined: Sat Jul 27, 2013 7:10 pm
My Generation: 4G
XBOX GamerTag: Randyricky
PSN GamerTag: Rikmister1

Tuning

Post by Rikmister » Sat Jul 27, 2013 8:42 pm

Hi guys new to this forum and the ludes. I have a couple of questions first is my lude started life in Japan as a 2l since being imported its had a 2.2l installed. I am looking at modding this so I am happy to spend money on it. I was going to do injectors intake and exhaust and a new ecu p28 hondata system but I have read about different figments ECT. Also is there anyone that can tune these round Cambridgeshire, I have searched and searched and searched but I can't find anyone that specialises in Honda/ludes.
Sorry for my noobishness

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21195
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1911 times
Been thanked: 235 times

Post by wurlycorner » Sat Jul 27, 2013 8:52 pm

Welcome,

If it's the fitment you want carrying out, jozefsan runs 4speed in Brandon and knows ludes very well. Don't think ECU tuning is something he has the gear for though?

There's i-tuned in Ipswich, but some forum members (here and other forums) have had some VERY bad experiences there so you'd be best advised to avoid..?

User avatar
A1ex
Posts: 3189
Joined: Fri Jan 27, 2012 7:43 pm
My Generation: 5G

Post by A1ex » Sat Jul 27, 2013 9:15 pm

If you want tuning, it's worth the drive to Performance Autoworks in Gloucester;

http://www.performance-autoworks.co.uk/index.php
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K :D

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Sat Jul 27, 2013 9:31 pm

Welcome to the club mate :)

Can we assume it was a 2.2 Vtec you had installed? Have you uprated the brakes to Vtec jobbies s well?

Rikmister
Posts: 132
Joined: Sat Jul 27, 2013 7:10 pm
My Generation: 4G
XBOX GamerTag: Randyricky
PSN GamerTag: Rikmister1

Post by Rikmister » Sat Jul 27, 2013 9:50 pm

Thanks for the replies I know my way around a civic but new to the ludes. Unfortunately brakes are standard (crap) it's 2.2 vtec. I planned on buying all the tuning parts then upgrading the brakes before the actual tune. So I know what sort of price I'm looking at for doing everything. Will check the one out in Gloucester buddy

User avatar
NafemanNathan
LotM Winner
Posts: 20144
Joined: Sun Aug 08, 2010 9:37 pm
My Generation: 0G
Location: Yeovil, Somerset
Has thanked: 8 times
Been thanked: 121 times

Post by NafemanNathan » Sat Jul 27, 2013 10:00 pm

For an induction kit, £150 plus for a decent one (AEM or BMC), For an intake manifold £100 plus for an ATR one (Which needs a few minor mods) or more for a Skunk2 job (Which is based on the ATR one). There is little to no difference between the performance they provide, but the Skunk2 is a direct bolt on. There's no real point in uprating the injectors unless you start looking at cams as well, then there's lots of options there. For exhaust manifolds, look at Mugen or Fujitsubo (although both rare) or go custom (Check out Solid Fabrications). Go decat and then a 2.25"-2.5" catback depending on your build, or even a 2.75"-3.0" if you end up going for big hp's.

Lots of info on this site, and lots of knowledgeable folks on here too, so if you need to know anything more specific just ask :)

Rikmister
Posts: 132
Joined: Sat Jul 27, 2013 7:10 pm
My Generation: 4G
XBOX GamerTag: Randyricky
PSN GamerTag: Rikmister1

Post by Rikmister » Sat Jul 27, 2013 10:06 pm

Ok thanks it already has induction kit on it unsure of what make though. I will probs buy a skunk 2 manifold next week or the week after and will keep you up to date

Cutz
Posts: 340
Joined: Sat Oct 12, 2013 2:05 am
My Generation: 4G
XBOX GamerTag: Masta Cutz
Location: Northampton

Post by Cutz » Thu Apr 17, 2014 10:21 pm

Rikmister wrote:Thanks for the replies I know my way around a civic but new to the ludes. Unfortunately brakes are standard (crap) it's 2.2 vtec. I planned on buying all the tuning parts then upgrading the brakes before the actual tune. So I know what sort of price I'm looking at for doing everything. Will check the one out in Gloucester buddy
if the brakes are crappy mate then i'd suggest the accord type-r 2-pot caliper conversion, combined with re-drilled EP3 300mm front brake discs. makes a dramatic braking improvement.

as for tuning I've heard nothing but good things about Performance AutoWorks...but I used Advanced Motorsport & Engineering in Silverstone, Northampton. Just round the corner from the Grand Prix track. Dan is fantastic and there isn't an ECU he can't tune! Plus he's a Honda nut himself so you get a bit of extra special attention ;-)

great prices aswell, did a full map, tune, and general setup including full cold start tuning on my Apexi Power FC. did it over 3 days and only cost £250 :-)
Matt
Civic Type-22
Red-R Performance
http://www.red-r-performance.com
Image

Post Reply

Return to “Tuning”