Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Honda prelude 2.2 Vtec 95
Honda prelude 2.2 Vtec 95
[/url]mg]
Honda prelude 2.2Vtec for sale £1000
4ws
89k full history
17in alloys
Front and back strut brace
K-sport coil overs £650 six months ago professional set up
Standard shocks with 40mm lowering springs
Apex controller
Braided brake lines
Drilled and grooved front and rear disks
New pads ( yellow stuff front pads as new inc)
Spoon chipped ecu ( standard 1 inc)
Vtec cuts in at 4800
4 into 1 with de- cat
Light weight flywheel
Aem air take with tubed feed for air take
Magnecor competition leads
Type R seats
Spare 15in wheels with slicks ( worn)
So you can put into car and drive to the track
Carbon fibre bonnet ( needs a polish)
Fully lightened about 20 stone ( air con removed etc)
JDM spare engine 2.2 Vtec
Lots of spares.
Great for track and road
Location: Ashford, Kent
Honda prelude 2.2Vtec for sale £1000
4ws
89k full history
17in alloys
Front and back strut brace
K-sport coil overs £650 six months ago professional set up
Standard shocks with 40mm lowering springs
Apex controller
Braided brake lines
Drilled and grooved front and rear disks
New pads ( yellow stuff front pads as new inc)
Spoon chipped ecu ( standard 1 inc)
Vtec cuts in at 4800
4 into 1 with de- cat
Light weight flywheel
Aem air take with tubed feed for air take
Magnecor competition leads
Type R seats
Spare 15in wheels with slicks ( worn)
So you can put into car and drive to the track
Carbon fibre bonnet ( needs a polish)
Fully lightened about 20 stone ( air con removed etc)
JDM spare engine 2.2 Vtec
Lots of spares.
Great for track and road
Location: Ashford, Kent
Last edited by tricky on Wed Mar 22, 2017 6:59 pm, edited 5 times in total.
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21217
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1958 times
- Been thanked: 239 times