H22 Seals

[Prelude danny]

I'm after some seals for a h22a

Cam seal
Distributor seal
Balance shaft seal
Oil cooler o ring

I have a crank seal but wanting all the above to make sure the leak on pulley side is cured

[RattyMcClelland]

I'm after some seals

[vanzep]

^^^
Your local Honda dealer will get this for you. Most of the parts you are looking for only a few quid each.
Also order the balance shaft seal retainer kit - this stops the seal popping out. I will try and get you the part numbers.

list is from three years ago but should be of some use:

Parts ordered so far:-

Balancer shaft retainer kit. Honda pt no.06923-POA-306. Maindealer cost £3.47
H22 water Pump&Gasket for BB4. Bellocat(Ebay) cost £38.50
H22 to H23 Manual Tensioner kit. HTune £93.48
Camshaft Oil seals - Honda pt no.91213-PR3-004 Maindealer cost £7.62x2.Size 29x43x8
Balancer belt. Honda pt no.13405-PT0-004 - Maindealer cost £38.40
Timing belt. Gates PowerGrip no.T226 (155x24) Motorfactor £35
Crankshaft pulley woodruff key.Honda pt no,.90704-PT0-000 Maindealer cost £6.91 Key size is 4.5x38.5
Balancer shaft oil seal.Honda pt no.91233-PT0-003.Maindealer cost £10.90.Size 27x40x8
Crankshaft oil seal.Honda pt no.91212-P0A-004.Maindealer cost £13.64.Size 40x52x7
3 litres super red coolant £20
All prices are inclusive of vat and delivery charges.
.
Last edited by vanzep on Tue Mar 20, 2012 6:50 pm, edited 1 time in total.
1996-2000 EG9 Blue Civic 1.6 Vti
2000 on > BB4 Red Prelude 2.2 Vtec

[Prelude danny]

I'm after some seals

Always one

[Prelude danny]

Thanks vanzep

I bought this from jap performance

[Prelude danny]

The codes don't work