Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Injectors for a 4th gen JRSC setup?

Engine/Gearbox questions and discussion
Post Reply
DanishLuder
Posts: 122
Joined: Sun Nov 26, 2017 9:50 pm
My Generation: 4G
Has thanked: 1 time
Been thanked: 6 times

Injectors for a 4th gen JRSC setup?

Post by DanishLuder » Sun May 24, 2020 8:53 pm

Hey guys.

I'm going to be building a JRSC setup on my 4th gen h22a2 - Kit from @nitin_s1.
But as it is a 4th gen, I will be needing some low impedance, peak and hold injectors, preferably around 500 cc +.

The only ones that I can actually find that I know will fit the AEM fuelrail, are RC Engineering injectors, and they cost 125 pounds each, no matter if I choose 750, 1000 or 1200cc. - Thats 500 pounds just for injectors. :roll:

I was just wondering if any of you have used different ones, not necessarily in a supercharger setup?
I read something about Evo 8/9 560cc injector could maybe work, but I cant seem to find any solid evidence of this.

Cheers,

User avatar
Vtecmec
LotM Winner
Posts: 4762
Joined: Fri Aug 06, 2010 5:43 pm
My Generation: 4G
XBOX GamerTag: vtecmec
Location: East Midlands
Has thanked: 11 times
Been thanked: 112 times

Injectors for a 4th gen JRSC setup?

Post by Vtecmec » Mon May 25, 2020 12:14 am

Mitsubishi evo 8, they are 560cc, fit perfectly and work like a charm on my turbo build.

DanishLuder
Posts: 122
Joined: Sun Nov 26, 2017 9:50 pm
My Generation: 4G
Has thanked: 1 time
Been thanked: 6 times

Injectors for a 4th gen JRSC setup?

Post by DanishLuder » Sat Jun 06, 2020 9:30 pm

Vtecmec wrote:
Mon May 25, 2020 12:14 am
Mitsubishi evo 8, they are 560cc, fit perfectly and work like a charm on my turbo build.
Do you have a specific item number for it or something close?
Just so that I get the correct one. :D

And also, did you buy new ones ore refurbished?

User avatar
Vtecmec
LotM Winner
Posts: 4762
Joined: Fri Aug 06, 2010 5:43 pm
My Generation: 4G
XBOX GamerTag: vtecmec
Location: East Midlands
Has thanked: 11 times
Been thanked: 112 times

Injectors for a 4th gen JRSC setup?

Post by Vtecmec » Sat Jun 06, 2020 10:44 pm

I bought second hand like these:

https://www.ebay.co.uk/itm/MITSUBISHI-L ... ad10ce39ee

Then had these guys refurbish them, though they didn't really need it:

https://www.fuelinjectorclinic.co.uk

DanishLuder
Posts: 122
Joined: Sun Nov 26, 2017 9:50 pm
My Generation: 4G
Has thanked: 1 time
Been thanked: 6 times

Injectors for a 4th gen JRSC setup?

Post by DanishLuder » Tue Jun 23, 2020 9:32 pm

Vtecmec wrote:
Sat Jun 06, 2020 10:44 pm
I bought second hand like these:

https://www.ebay.co.uk/itm/MITSUBISHI-L ... ad10ce39ee

Then had these guys refurbish them, though they didn't really need it:

https://www.fuelinjectorclinic.co.uk
How much did you end up paying in total?

User avatar
Vtecmec
LotM Winner
Posts: 4762
Joined: Fri Aug 06, 2010 5:43 pm
My Generation: 4G
XBOX GamerTag: vtecmec
Location: East Midlands
Has thanked: 11 times
Been thanked: 112 times

Injectors for a 4th gen JRSC setup?

Post by Vtecmec » Tue Jun 23, 2020 9:41 pm

About £110 for the injectors and £40 for the cleaning.

newkid
Supporter 2016
Posts: 2628
Joined: Thu Feb 23, 2012 8:28 pm
My Generation: 4G
PSN GamerTag: spaz_ma_taz
Location: Edinburgh
Has thanked: 13 times
Been thanked: 35 times

Injectors for a 4th gen JRSC setup?

Post by newkid » Fri Jun 26, 2020 9:32 am

Surely if its getting remapped you can use any injectors?

User avatar
Vtecmec
LotM Winner
Posts: 4762
Joined: Fri Aug 06, 2010 5:43 pm
My Generation: 4G
XBOX GamerTag: vtecmec
Location: East Midlands
Has thanked: 11 times
Been thanked: 112 times

Injectors for a 4th gen JRSC setup?

Post by Vtecmec » Fri Jun 26, 2020 10:29 am

You can but need to consider physical fitment into the rail and injector plug type. Also if there is a need for resistor box or not. These are plug and play.

Also 560cc would be good for up to 350+ bhp.

Post Reply

Return to “Engine / GearBox”