Throttle body size + intake

Danni22 · Post by **Danni22** » Mon Oct 29, 2012 5:06 pm

Hey lads I'm making my own induction kit to plumb it into a recess in the bay.

My question is what size are most induction kit sizes I was thinking 70mm intercooler piping into a 45* reducer to the 60mm for the throttle body

Would theses sizes be ok lads?

Is the throttle body 60mm??

Thanks

Post by **Merlin** » Mon Oct 29, 2012 5:08 pm

Danni22 wrote:Is the throttle body 60mm??

On a regular lude yeah. On the Type-S, S-SPEC, H22a8, and H22a7 ATR use a 62mm.

Danni22 · Post by **Danni22** » Mon Oct 29, 2012 5:10 pm

Yehh just a regular lude.. Thanks for the help

Ferdie · Post by **Ferdie** » Mon Oct 29, 2012 8:26 pm

i've got the skunk2 throttle and thats 70mm and bored my skunk2 intake also to 70mm

jozefsan · Post by **jozefsan** » Mon Oct 29, 2012 8:46 pm

its bit more into it then slap pipe on TB, you must be good in flow numbers to beat OEM designe

Danni22 · Post by **Danni22** » Mon Oct 29, 2012 9:09 pm

I'm making my own induction piping that not my own inlet manifold..

Just making sure the tb was 60mm and using 70mm pipe into a 60mm reducer would work..

Danni22 · Post by **Danni22** » Mon Oct 29, 2012 9:34 pm

With the induction kit piping do I need to vent the rocker cover into it or can I place a filter on it?

littlefeller · Post by **littlefeller** » Mon Oct 29, 2012 10:39 pm

some folk use a catch can here

Danni22 · Post by **Danni22** » Mon Oct 29, 2012 10:46 pm

What do you lads think will look better catch can or filter, but don't forget it's a tight bay haha

Mind if I go for a catch can could I then route the other breather on the passengers side of the rocker to the catch can?

littlefeller · Post by **littlefeller** » Tue Oct 30, 2012 6:17 am

i have seen some cans fitted on the driverside at the front, next to the rad (attached to the battery strap). infact it could be placed where ever you wish really (they dont really do anything, just look good)

best bit is you can make your own

i have a pdf on this if you want to have a butchers

it has pics of ludes with cans fitted