Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

bouncy idle

Engine/Gearbox questions and discussion
Post Reply
User avatar
si import
Supporter 2016
Posts: 1255
Joined: Sun Jan 29, 2012 4:47 pm
My Generation: 4G
Location: Essex
Has thanked: 2 times
Been thanked: 23 times

bouncy idle

Post by si import » Sat Feb 02, 2013 4:34 pm

When warmed up the idle starts bouncing. i have changed the IACV and the FITV has been removed . what are the other possibles causes that could be doing this.
cheers Jon
http://www.ludegeneration.co.uk/profile ... t4910.html
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
Image

User avatar
Vtecmec
LotM Winner
Posts: 5490
Joined: Fri Aug 06, 2010 5:43 pm
My Generation: 4G
XBOX GamerTag: vtecmec
Location: East Midlands
Has thanked: 149 times
Been thanked: 441 times

Post by Vtecmec » Sat Feb 02, 2013 5:07 pm

Low coolant, or a vac leak?

User avatar
rob quilter
Supporter 2014
Posts: 5331
Joined: Mon Aug 09, 2010 1:40 pm
My Generation: 5G
PSN GamerTag: robquilter
Location: Derby

Post by rob quilter » Sat Feb 02, 2013 5:20 pm

The above. Also, when did you change your IACV? Could maybe do with a quick clean with carb cleaner?
PERFORMANCE PARTS FOR JAPANESE CARS - http://WWW.TOKYOSQUAD.COM

FOLLOW US ON FACEBOOK - http://WWW.FACEBOOK.COM/TOKYOSQUAD

User avatar
Rich
Pickle Rich
Posts: 536
Joined: Tue May 03, 2011 2:55 pm
My Generation: 4G
PSN GamerTag: richardofeston
Location: Teesside
Has thanked: 1 time

Post by Rich » Sat Feb 02, 2013 5:31 pm

Mine was caused by a vacuum leak, turned out my oil catch can wasn't air tight

User avatar
Dbo
LotM Winner
Posts: 1761
Joined: Thu Feb 02, 2012 2:55 pm
My Generation: 4G
Location: Southampton

Post by Dbo » Sat Feb 02, 2013 5:31 pm

My son's did this just before the tell tale leak to show his waterpump was on the way out, even when we replaced the pump we had to air bleed the water system 3 times before it stopped .
Could be worth a check ;)
Mine did it for a while and it was the TPS (throttle position sensor) out by 1mm.
Image

User avatar
Bri
Posts: 923
Joined: Thu Aug 05, 2010 10:33 pm
My Generation: 4G
PSN GamerTag: funky_bri
Location: Wrexham area

Post by Bri » Sat Feb 02, 2013 7:00 pm

I have had it twice once a water level issue, once a split vacume hose right underneath the pipe at the back of the inlet manifold, it can also be a bad connection on the fitv plug.

User avatar
si import
Supporter 2016
Posts: 1255
Joined: Sun Jan 29, 2012 4:47 pm
My Generation: 4G
Location: Essex
Has thanked: 2 times
Been thanked: 23 times

Post by si import » Sat Feb 02, 2013 7:40 pm

Thanks for all the replies. Ill have a look tomorrow and report back.
Cheers jon
http://www.ludegeneration.co.uk/profile ... t4910.html
BB4 Si Vtec LSD . 263.4 bhp - 192.7 lb/ft .13.5@105mph
BB1 Si Vtec LSD. R.I.P . 1/4mile 14.1451 secs @ 99.71mph
BB4 Si Vtec LSD Turbo . R.I.P
Image

User avatar
chrismc
Posts: 517
Joined: Mon Jan 30, 2012 10:30 am
My Generation: 4G
Location: Highworth, Wilts

Post by chrismc » Sat Feb 02, 2013 7:41 pm

Over advanced ignition timing caused the idle to bounce on mine...
95 UKDM BB1 VTEC (retired)
2019 mk7.5 Golf GTD
2000 UKDM CW Integra R

User avatar
fweakyg
Supporter 2016
Posts: 687
Joined: Tue Mar 13, 2012 8:29 pm
My Generation: 4G

Post by fweakyg » Sat Feb 02, 2013 8:10 pm

My car hunted for mmoontthhssssssssss ..... Thought I got it sorted when I got a mate to have a lil tinkle but then it jut started again... then it just stopped ???!!! Now shes stopped panting and strater purring again :P .. Ive done a thread on here about it somewhere.... As much help this info was for you hahah... sorry i dunno what started it or stopped it :lol:

Post Reply

Return to “Engine / GearBox”