Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Hmm

Engine/Gearbox questions and discussion
Post Reply
User avatar
LewisH
Posts: 1712
Joined: Fri Dec 14, 2012 6:31 pm
My Generation: 5G
XBOX GamerTag: Hepges
Location: Lowestoft

Hmm

Post by LewisH » Mon Feb 11, 2013 5:54 pm

Right, the lad who owned my lude before me bought one of these http://www.ebay.co.uk/itm/HONDA-PRELUDE ... 35b5ff53ab

If anyone has one, how the FECK does it go on ?
BB8 UKDM VTi

User avatar
Ammo
Admin | Spammer Assassin
Posts: 2945
Joined: Sun Jun 20, 2010 10:35 pm
My Generation: 4G
Location: Boston
Been thanked: 6 times
Contact:

Post by Ammo » Mon Feb 11, 2013 6:00 pm


User avatar
LewisH
Posts: 1712
Joined: Fri Dec 14, 2012 6:31 pm
My Generation: 5G
XBOX GamerTag: Hepges
Location: Lowestoft

Post by LewisH » Mon Feb 11, 2013 6:01 pm

Mm, sort of. Mines a 5th gen. I found it n the glove box when i got it home and i didnt know what it was at first. He actually payed £25 for it (lol!)

I might try fit it, if it actually does anything :?
BB8 UKDM VTi

User avatar
Dbo
LotM Winner
Posts: 1761
Joined: Thu Feb 02, 2012 2:55 pm
My Generation: 4G
Location: Southampton

Post by Dbo » Mon Feb 11, 2013 6:06 pm

they do work just not as good as a true shortshift ;)
i have one in the garage for a 4th gen that i used before getting the FM shift.
the 5th ones look a little more complicated.
Image

User avatar
LewisH
Posts: 1712
Joined: Fri Dec 14, 2012 6:31 pm
My Generation: 5G
XBOX GamerTag: Hepges
Location: Lowestoft

Post by LewisH » Mon Feb 11, 2013 6:06 pm

Yeah theres no fitting diagram so ive just gotta work out where it goes lol!
BB8 UKDM VTi

User avatar
Lude-dude
Moderator
Posts: 2181
Joined: Tue Aug 03, 2010 10:39 pm
My Generation: 5G
XBOX GamerTag: Vtec Junky
PSN GamerTag: Rob7niner
Has thanked: 3 times
Been thanked: 3 times

Post by Lude-dude » Mon Feb 11, 2013 6:19 pm

you have to cut away some plastic, no biggie plastic is covered by the gaiter
Image

H22a5 UKDM 2.2 VTI 244Bhp 180lbs/ft Crower stage 2
http://www.ludegeneration.co.uk/profile ... t3211.html

User avatar
LewisH
Posts: 1712
Joined: Fri Dec 14, 2012 6:31 pm
My Generation: 5G
XBOX GamerTag: Hepges
Location: Lowestoft

Post by LewisH » Mon Feb 11, 2013 6:20 pm

LL, got any pics of where it goes? So i then know what im doing xD If it actually does what it says ill fit it.
BB8 UKDM VTi

User avatar
Lude-dude
Moderator
Posts: 2181
Joined: Tue Aug 03, 2010 10:39 pm
My Generation: 5G
XBOX GamerTag: Vtec Junky
PSN GamerTag: Rob7niner
Has thanked: 3 times
Been thanked: 3 times

Post by Lude-dude » Mon Feb 11, 2013 6:24 pm

had it on my last lude, no pics but its simple to install

does have shorter throw, a true short shift would have better feel I presume... never had one
Image

H22a5 UKDM 2.2 VTI 244Bhp 180lbs/ft Crower stage 2
http://www.ludegeneration.co.uk/profile ... t3211.html

User avatar
LewisH
Posts: 1712
Joined: Fri Dec 14, 2012 6:31 pm
My Generation: 5G
XBOX GamerTag: Hepges
Location: Lowestoft

Post by LewisH » Mon Feb 11, 2013 6:27 pm

Well i didnt pay for it, so ill fiddle tomorrow 8-) Replaced my door and wing today, 2 hours labour (first time removing for my self) and its all done, lined up and looking very very nice.
BB8 UKDM VTi

User avatar
Dbo
LotM Winner
Posts: 1761
Joined: Thu Feb 02, 2012 2:55 pm
My Generation: 4G
Location: Southampton

Post by Dbo » Mon Feb 11, 2013 6:35 pm

the adapters i found took away about 30 to 35% of the throw were as the true shifters are more 50%.
in the 4th gen the adapters were a little bulky and you had to adapt the gaitor to fit.

i had a 3 hole one and that was a pain as hole 1 would put the throw so far foward your knuckles went through the sterio and the 3rd hole put the throw so far back. so only the centre hole was any good.

and the heavier the knob you put on the better it feels ;) a light gear knob with short throw is nasty :(
Image

Post Reply

Return to “Engine / GearBox”