power
Posted: Wed Jul 23, 2014 9:38 pm
hi, what power is any one getting with few basic mods ie
manifold
exhaust
induction
and mapping
manifold
exhaust
induction
and mapping
Page 1 of 2
Re: power
Posted: Wed Jul 23, 2014 10:32 pm
We are doing a dyno run on Saturday so will be loads of results for you to see
Posted: Thu Jul 24, 2014 12:01 am
I wana do a dyno run 
Posted: Thu Jul 24, 2014 1:02 am
Mapping on a 5g isn't a basic mod unfortunately - it means changing the ecu (crome, hondata, aem etc.)
Unless I've misunderstood previous comments on the forum and stretched my limited 5g knowledge too far there 
someone that knows help me out? Merlin???
Unless I've misunderstood previous comments on the forum and stretched my limited 5g knowledge too far there someone that knows help me out? Merlin???Posted: Thu Jul 24, 2014 2:51 am
Same as a 4th gen thenwurlycorner wrote:Mapping on a 5g isn't a basic mod unfortunately - it means changing the ecu (crome, hondata, aem etc.)
Only difference is you need a conversion harness from obd2a(if memory serves me right) to obd1Posted: Thu Jul 24, 2014 5:25 am
Where you will do that dyno ? on big meet ?
Some like I wonna check how many hp are still live :d
Some like I wonna check how many hp are still live :d
Posted: Thu Jul 24, 2014 8:58 am
Not quite the same... on a 4th gen you can buy a ready re-mapped chip from Rob and stick that in for about 20 quid all in... Magnitude of cost difference and ease.
Posted: Thu Jul 24, 2014 8:59 am
I got close to 280bhp with bolt on mods and a tune. 
Posted: Thu Jul 24, 2014 9:20 am
and that was entirely straight forward, wasn't it 
Posted: Thu Jul 24, 2014 11:05 am
It was as straight forward as Dale Winton.wurlycorner wrote: