Page 1 of 1
Injector question (again) :(
Posted: Sun Feb 01, 2015 8:34 pm
by hoppi05
Evening all I have been asked which injectors I need for my 1992 h22a JDM unit I got from bri's?
Can anyone confirm which for me?
I was asked:- are they 4th gen import with a yellow dab of paint on the side????
Yes I understand I only need to look at the ones I do have however I have a memory like sieve and have forgot both times a have been to the garage this weekend!?!?!
If anyone can give me the quick answer that quid be great..... @106pete
Cheers all
Posted: Sun Feb 01, 2015 9:01 pm
by mercutio
as far as i know all 4g 2.2 vtecs had the same injectors
Posted: Mon Feb 02, 2015 9:37 am
by vanzep
All jdm 4th gen vtec injectors that i have seen have yellow dab of paint on side
Posted: Mon Feb 02, 2015 10:11 am
by wurlycorner
Interesting...
Looking up my H22A2 injector part number, shows 2 options;
- 06164P0F000
(06164-P0F-000)
AND
- 06164P13000
(06164-P0F-000)
Top code (without hyphens) is different, but the second code (the one with hyphens in, that I recognise as the usual Honda part number format) is the same.
So I guess there is no actual difference and they're interchangeable. So it most likely just reflects 2 different OEMs supplied Honda? That could account for the paint colours.
I don't have the chassis number for any of my jdm (H22A) ludes to hand, so can't look up the injector part number to cross-check.
If someone can pm me the VIN from their H22A lude, I can look it up?
Posted: Mon Feb 02, 2015 11:52 am
by hoppi05
thanks Wurlycorner
when searching i have found the codes above and this one 06164-P0A-000???
Posted: Mon Feb 02, 2015 12:38 pm
by hoppi05
OK so called Honda used Bri reg off his photo's i hope you dont mind buddy and the PN is - 06164-P13-000
now whether that helps???
Posted: Mon Feb 02, 2015 12:38 pm
by hoppi05
FYI
06164-P0F-000 - Honda said is the old code
Posted: Mon Feb 02, 2015 1:23 pm
by wurlycorner
hoppi05 wrote:OK so called Honda used Bri reg off his photo's
Honda can't do a lookup by registration number on JDM cars in the UK, only by VIN.
Posted: Mon Feb 02, 2015 1:24 pm
by wurlycorner
hoppi05 wrote:
06164-P0F-000 - Honda said is the old code
Yeah that's possible. I think the parts diagrams only have the original part number, then when they look it up in the live ordering system it will tell them them any superseded numbers.
Posted: Mon Feb 02, 2015 1:36 pm
by hoppi05
yes he said 'that's an import' and then checked again incase any one wants some new ones there are none in the UK and none in europe apparently so its a months lead time....
based on this info i am safe to conclude the injectors pete has are oko for my car?
