Page 1 of 1
clutch damper bypass pipe where u buy them from
Posted: Sat Oct 17, 2015 5:25 pm
by kane88
Hi all after a braided clutch line for my 2000 prelude get rid of the clutch damper but were u buy them from i can find for civics and stuff but not prelude
Thanks in advance
Posted: Sat Oct 17, 2015 7:07 pm
by gb-lude
Made a SS braided hose with AN fitting directly from the master to slave cylinder. All parts available on eBay .seller Torques .
Just get the corrects fittings for the master and slave cylinder. Imused AN 3 line .
See page 6 of my build below.
Posted: Mon Oct 19, 2015 11:57 am
by Merlin
If you cannot find an off the shelf one you can get one made. The MC takes an M12 x 1.0 fitting while the slave is M10 x 1.0.
Posted: Mon Oct 19, 2015 12:40 pm
by Drax
add this to the wiki maybe?
Posted: Mon Oct 19, 2015 12:47 pm
by lewd lude lover
i-tuned made a load for the lude a few years ago. ask him maybe?
Posted: Mon Oct 19, 2015 1:30 pm
by NafemanNathan
Posted: Mon Oct 19, 2015 1:33 pm
by Merlin
Will that line a be a little longer due to the Americans driving on the wrong side of the road? The length won't matter though.
Posted: Mon Oct 19, 2015 1:36 pm
by NafemanNathan
At 60" I'd say so. I didn't measure mine the other day (It certainly wasn't that long), but it'd be worth asking the seller if they can have them made shorter.
Posted: Mon Oct 19, 2015 4:36 pm
by gb-lude
That will work. its a nice mod to give you more feel and tidy up the bay.
Merlin.... they drive on the right side of the road... you sit on the right side of your car... we all do something wrong/left
