Page 1 of 2
H22a8 to H22a5 engine swap.
Posted: Thu Dec 10, 2015 9:45 am
by Ludebob95
Hi guys. So I've a 5th gen with a poorly a8 engine which I bought off a guy that blew a hole in a piston!!!!! Question is what problems will I encounter swapping in an a5 I have from another car? Any help is much appreciated
Posted: Thu Dec 10, 2015 9:54 am
by nitin_s1
H22A8 - 200ish BHP.
H22A5 - 185ish BHP.
Posted: Thu Dec 10, 2015 10:00 am
by Ludebob95
@nitin_s1 yes but that's not a problem.
Posted: Thu Dec 10, 2015 10:31 am
by Merlin
You will either need to use an H22a5 ECU or retrofit a knock sensor to the H22a5 (if you use the H22a8 ECU), as the H22a8 has a knock sensor while the H22a5 does not.
Posted: Thu Dec 10, 2015 10:55 am
by Ludebob95
That's no problem as I have a complete car to do transplant. Will that mean I need the keys from that car as well for the immobiliser or is that a separate unit? Thanks @Merlin
Posted: Thu Dec 10, 2015 11:03 am
by Merlin
That is a good point. In that case the best way forward would be to use the H22a8 ECU and put a knock sensor on the H22a5.
Posted: Thu Dec 10, 2015 11:18 am
by Ludebob95
So I just need to buy a knock sensor and screw it in?
Posted: Thu Dec 10, 2015 12:00 pm
by Merlin
There will be a knock sensor on your H22a8, use that
Posted: Thu Dec 10, 2015 1:06 pm
by Ludebob95
There was one it got
broken
Posted: Thu Dec 10, 2015 1:27 pm
by Merlin
You can get new knock sensors on eBay for a decent price.