Lude Generation

Posted: **Wed Mar 02, 2016 11:07 pm**

I bought some injectors off ebay from a lad who was running a turbo h22 but now ive gor them there different from standard injectors as now he sais i might have to modify the fuel rail to fit

are h22a and h22a8 the same fitment or different

Also is 700cc too big for a n/a build

Posted: **Thu Mar 03, 2016 9:07 am**

H22a8 will be the same as 5th gen H22a injectors but different to 4th gen H22a injectors. But they should all fit in the same holes in the fuel rail, if the don't I am in trouble with my own build.

njord wrote:Also is 700cc too big for a n/a build

Yes I think so. For comparison I have 450cc and I am around 270bhp.

Posted: **Thu Mar 03, 2016 5:17 pm**

what power figure are you looking for and what management are you using?

Posted: **Thu Mar 03, 2016 5:36 pm**

I am running dta s60pro ecu and id love to see 300bph

I needed high impedance injectors (no resitor box) and Dan pointed these out on ebay for 115 quid

Posted: **Thu Mar 03, 2016 5:51 pm**

they may be a little too big but you can adjust the fueling through your ecu cant you? from what i have read you would possibly be better with 550cc-600cc but might be fine

Posted: **Thu Mar 03, 2016 6:21 pm**

Yea i though I'd go for them as seem cheap but seeing as they dont fit the bore of the fuel rail or itbs its being a pain in the ass

Posted: **Thu Mar 03, 2016 6:57 pm**

I don't know the reason for it but I expect your mapper will say they are too big, I think they like to run at around 80% ?

I'm awaiting a wiring loom for my s60 but it's been ages

, as for the injectors not fitting, I may of had the same problem! Is the injector a sung fit into the rail and won't fit with the o-ring? Also do the injectors seem to be to short in the bodies?

Posted: **Thu Mar 03, 2016 8:12 pm**

Yea i think that sounds about right Pete about the injectorsibeing tight and are short

I remember hearing they like to run something like 70 /80 duration

What are you exactly waiting for on the loom wise as ive made my own for the s40 and will be making mine for the s60

Posted: **Thu Mar 03, 2016 8:18 pm**

For 300bgh its enough up to 500cc injectors. Which easy goes from mitsubishi evo. Thats what im going to use on my turbo build

Posted: **Thu Mar 03, 2016 8:21 pm**

Merlin wrote:H22a8 will be the same as 5th gen H22a injectors but different to 4th gen H22a injectors. But they should all fit in the same holes in the fuel rail, if the don't I am in trouble with my own build.

njord wrote:Also is 700cc too big for a n/a build
Yes I think so. For comparison I have 450cc and I am around 270bhp.

I would say diferent is on only cc . As h22 injectors from 4gen is 345cc and h22a5 is 290cc. Not sure on h22a8 but think its 290cc too. Other than that there is only fuel rail feed line in diferent sides.