Page 1 of 1
TCS & Lightweight flywheel
Posted: Wed May 25, 2016 8:20 pm
by vanzep
Just wanted to know if im likely to have any issue with the Traction Control System if i fit a lightweight flywheel (Kaiten/Jun copy 4.6 kgs). Its going onto a manual 4th gen import BB1 with factory fitted TCS.
If anyone can shed some light it would be appreciated
Posted: Wed May 25, 2016 8:22 pm
by Drax
I've never had a problem, had the lightened fly fitted when it was converted to a manual and mine has oem TCS
Posted: Wed May 25, 2016 8:32 pm
by vanzep
perfect - thanks Drax
I dont know anything about the tcs and just wanted to check
Posted: Thu May 26, 2016 7:13 am
by batkosio
I`ve installed the TCS in my LHD, it is the grandfather of these systems- takes signal from the ABS sensors, 4WS, and sends them in the TCS control unit, which sends signals to the ECU to change fuel and timing when one wheel turns with different rate than the others. So I also think there won`t be a problem with your plan
Posted: Thu May 26, 2016 5:59 pm
by mercutio
yeah its a very simple cut the ignition system nothing too technical
Posted: Thu May 26, 2016 9:43 pm
by vanzep
