Lude Generation

Looking to get a fujitsubo manifold for my 4th gen bb4.the manifold will be getting removed from a 5th gen.I was wondering if this will be a problem and if it will fit okay and join up to my cat alright.am guessing there's going to be some kind of difference since it was removed from a 5th gen.

Hoping someone has some info on this or know what I ll need to Make this happen cheers

Which 5th gen is it getting removed from mate? What is the engine code.

Someone more knowledgeable than me will come along shortly but im sure the length of the H22a8 is longer than the H22a5.

Ranj

Am not too sure mate,I just know it's from a 5th gen and yeah the a8 has a different down pipe am sure.

Hopefully it's just a case of getting an adjustable de cat if the fitment is slightly off.

It's my manifold and it's coming off an h22a5 engine.

@newkid bought a new fuji mani and downpipe for his 4th gen so would be best person to tell you about fitment.

Are you getting the downpipe with the manifold or just manifold on its own?
If you can get the full exhaust system then all you would need to modify if one hanger on the back box as far as i know.

Same manifold fitment on h22a5 as on h22a and h22a2 4g's.

Just going to put this here in case you need it ...

http://www.ludegeneration.co.uk/post232182.html#p232182

I did actually have a look at the tri-y the other day, to see if it would work. I forget what I decided though...

Am sure it's the manifold and down pipe but I ll have to ask the seller to confirm that.

I might be interested in that de cat if I get the manifold.

Thanks for the info on the manifold fitment guide aswell,I have a bit more confidence about it going on now without many problems.

lewie fraser wrote:I might be interested in that de cat if I get the manifold.

It's not a decat bud, it's the last third of a Fujitsubo header... Just incase what you buy doesn't have it