Page 1 of 1
Cam lift /piston pocketing
Posted: Sat May 06, 2017 12:07 am
by mercutio
Just wondering how much lift before you need to work the pistons?
Posted: Sat May 06, 2017 12:11 am
by 4thgenphil
And duration and head/block skimmed and cam dialling and piston type.
Its a massively open question mate. Ive got stage 3+ cams with mahle 11.5-1 pistons and flat faced valces and my v2p clearances were ok with vtec locked on.
Posted: Sat May 06, 2017 1:26 am
by NafemanNathan
Well Rich has worked my ATR pistons for clearance using Pro 2 cams, advanced about 3 degrees.
What cams and pistons are you wanting to use?
Posted: Sat May 06, 2017 12:39 pm
by mercutio
Tuner stage 2 cams with standard h22a pistons just putting together another engine
Posted: Sat May 06, 2017 12:56 pm
by NafemanNathan
I'm pretty sure you're safe to leave the pistons with Tuner 2's.
Posted: Sat May 06, 2017 1:32 pm
by mercutio
Cheers Nathan
