Page 1 of 1
Chipped ECU query
Posted: Fri Dec 29, 2017 4:38 pm
by Anothersmith
Hi guys,
I have an H22 swapped civic with no ECU. I am trying to work out the best way to go. I know I can get a P28 with a basemap easily and cheaply, but this means I will then have to visit a tuner which is not practical for me for a while as I need the car running and mobile to get it through an MOT/ insurance/ tax etc.
So, my question is, can I buy an ecu with a chip already in it (hondata, etc) and then that is plug and play and I dont have to visit a tuning shop unless I want it fine tuned? Basically just trying to work out if there is a plug and play option!
Cheers,
Posted: Fri Dec 29, 2017 6:02 pm
by wurlycorner
What version of h22 do you have in it and how has it been wired into the existing car?
Posted: Fri Dec 29, 2017 9:28 pm
by Anothersmith
The block just says H22a there is no other number. It has been wired by cutting the old civic harness and re wiring the injectors and sensors that way.
Posted: Fri Dec 29, 2017 9:39 pm
by wurlycorner
So that's a JDM H22 (I presume from a 4th gen rather than the rare and odd-ball 5th gen Type-S H22a) which also has a knock sensor.
Not familiar with Civics... Did that have a knock sensor?
What OBD version are the ECU plugs on the civic?
Posted: Fri Dec 29, 2017 10:03 pm
by louckie
Anothersmith wrote:Hi guys,
I have an H22 swapped civic with no ECU. I am trying to work out the best way to go. I know I can get a P28 with a basemap easily and cheaply, but this means I will then have to visit a tuner which is not practical for me for a while as I need the car running and mobile to get it through an MOT/ insurance/ tax etc.
So, my question is, can I buy an ecu with a chip already in it (hondata, etc) and then that is plug and play and I dont have to visit a tuning shop unless I want it fine tuned? Basically just trying to work out if there is a plug and play option!
Cheers,
What civic if you give me a model code I can tell you when OBD
and if the loom has a knock sensor.
As far as I’m aware of it’s a tec wiring loom you can run it with rywire jumper harnesses keep us posted and will try to help
Posted: Fri Dec 29, 2017 10:05 pm
by Drax
A p28 is not from any h22 as far as I remember, so to me it wouldn't work/ wouldn't work very well on just that.
If you got a Hondata, there is a free basic h22 map available to download and install to get you going
Posted: Fri Dec 29, 2017 11:57 pm
by wurlycorner
Yeah I was wondering if it would be possible to just plug in a p13 from a JDM 4th Gen to get it running, with one of Rob's spoon chips.
Posted: Sat Dec 30, 2017 1:24 am
by newkid
Need more info.
What obd is car?
What obd engine is installed, distributor, injectors etc
Once that’s giving it’s easier to say which options are available ecu wise.
Posted: Fri Jan 05, 2018 1:59 pm
by DAN_ADRIAN FLUX
Hi.
If you do need any help with insurance at all then please feel free to drop me a line.
Regards,
Dan.