Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

H22A7 ATR inlet manifold + Hondata S300 + 68mm TB

Engine/Gearbox questions and discussion
User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21195
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1911 times
Been thanked: 235 times

Post by wurlycorner » Fri Jan 12, 2018 11:02 am

:think: S2000 injectors have a reputation for springing leaks and being expensive to replace, if I have picked that up correctly, while there are no known issues with Prelude or ATR injectors?
H10ndr is our resident expert for all things S2000

User avatar
louckie
Posts: 224
Joined: Sun Nov 12, 2017 6:44 pm
My Generation: 5G
XBOX GamerTag: louckie
Location: Colchester Essex
Has thanked: 29 times
Been thanked: 14 times

Post by louckie » Fri Jan 12, 2018 11:17 am

wurlycorner wrote:Plus rep there @Sailor
Though... Pics of the injectors?

TPS is the same then
Looks like egr valve is different connector
Distributor definitely different, as expected - A5 has more pin-outs (I suspect due to having the tdc sensor built in where a7 doesn't)

Louckie? How do they compare to yours?
will take pictures tonight and post guys TIA

User avatar
louckie
Posts: 224
Joined: Sun Nov 12, 2017 6:44 pm
My Generation: 5G
XBOX GamerTag: louckie
Location: Colchester Essex
Has thanked: 29 times
Been thanked: 14 times

Post by louckie » Fri Jan 12, 2018 11:23 am

wurlycorner wrote:Since you are looking to fit an ATR manifold to an ATR engine, you shouldn't need to do all the mods that prelude owners normally have to do. However, as it's in a prelude, you would still have to do a couple of them I think;
Step 4 and 5 on below
http://roskoracing.com/TechBlog/?p=87
Doing steps 4 and 5 as we speak due to be incredibly busy at work ......

Therealjj91
Posts: 468
Joined: Tue Jul 16, 2013 8:33 pm
My Generation: 5G
Location: Portsmouth

Post by Therealjj91 » Fri Jan 12, 2018 9:03 pm

I had S2000 injectors on mine and they worked fine but you have to make sure you buy the right year.

User avatar
louckie
Posts: 224
Joined: Sun Nov 12, 2017 6:44 pm
My Generation: 5G
XBOX GamerTag: louckie
Location: Colchester Essex
Has thanked: 29 times
Been thanked: 14 times

Post by louckie » Fri Jan 12, 2018 9:39 pm

Image

Image

Image

Sneak peek of the newww rimmmzzzz

Image

Image


Image
Image


Image

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21195
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1911 times
Been thanked: 235 times

Post by wurlycorner » Fri Jan 12, 2018 9:57 pm

Yeah, so you are definitely running an a5 distributor and egr off an a5 as well.
I assume they put an a7 short block in (i.e. swapped ALL ancillaries and engine loom from the previous engine).

The A7 egr connector is different, but if the a5 egr bolts onto the a7 manifold, just swap it and happy days - no fannying around. That leaves the only question being the injectors.

It's literally just the electrical connector that we need photos of on both of sailor's cars and louckie

User avatar
louckie
Posts: 224
Joined: Sun Nov 12, 2017 6:44 pm
My Generation: 5G
XBOX GamerTag: louckie
Location: Colchester Essex
Has thanked: 29 times
Been thanked: 14 times

Post by louckie » Fri Jan 12, 2018 10:07 pm

wurlycorner wrote:Yeah, so you are definitely running an a5 distributor and egr off an a5 as well.
I assume they put an a7 short block in (i.e. swapped ALL ancillaries and engine loom from the previous engine)
The more I’ve been looking into this the more it’s juat twigged

That I doubt the vehicle is even running an ATR ecu

It has a standard inlet dizzy and exhaust manifold

The wiring loom again is standard. It is literally an A5 with a jumper up engine producing little to no more power at a guess

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21195
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1911 times
Been thanked: 235 times

Post by wurlycorner » Sat Jan 13, 2018 3:20 pm

Oh yeah, I'm sure it won't be running an A7 ECU.
The ECU's on 5g's were coded to the igntion key (immobiliser yo) so they wouldn't have wanted to fanny about with that...
The ATR exhaust manifold doesn't fit a 5th gen lude unless you modify the front cross-member.
Short block A7 into otherwise standard A5 prelude by the looks.

User avatar
louckie
Posts: 224
Joined: Sun Nov 12, 2017 6:44 pm
My Generation: 5G
XBOX GamerTag: louckie
Location: Colchester Essex
Has thanked: 29 times
Been thanked: 14 times

Post by louckie » Fri Jun 01, 2018 6:56 pm

Little update

Purchased black world Racing 68mm throttle body

Purchased ATR INLET

Purchased Hondata S300 V2 with obd1 to obd2a harness

Now my questions are.....

Do I have to run an EGR valve and the runner plate or can I blank it all ?

What injectors do I run..... ATR head and ATR injectors ? Although I’ve already tapped the holes to plug the secondary air feed for injectors ???...

As far as I’m away I have to run a 2 wire Iacv is there a walk through on this anywhere thanks in advance

User avatar
h10ndr
Posts: 819
Joined: Mon Sep 13, 2010 7:07 pm
My Generation: 4G
Location: West Yorkshire
Has thanked: 1 time
Been thanked: 9 times
Contact:

Post by h10ndr » Sat Jul 14, 2018 11:47 am

wurlycorner wrote::think: S2000 injectors have a reputation for springing leaks and being expensive to replace, if I have picked that up correctly, while there are no known issues with Prelude or ATR injectors?
@h10ndr is our resident expert for all things S2000
Sorry guys for the late reply...I been busy lol
Yes, I can confirm I had an injector leak on my 04 S2K. It wasn't the seals (replaced them all) turned out to be leaking from the body where there is a little hole.

https://www.s2ki.com/forums/s2000-under ... ng-632404/

Replaced all 4 with brand new OEM from balade-sports.
My search on s2ki.com/forums found pics with same leak. They are Keihin injectors.
Tim
2004 S2000 GT Berlina Black
SOLD 1992 JDM-BB1UKSPEC-B545P-H22A7-U2Q7-P72 NEPTUNE RTP
RIP 1995 UKDM-BB1-Pacific Blue Pearl
http://www.s2000-parts.com

Profile

Post Reply

Return to “Engine / GearBox”