Page 1 of 1
please help ecu p30 prelude bb1
Posted: Wed Jan 17, 2018 2:41 pm
by orni777
Hello everyone,
i have a problem with my prelude 4th with swap engine h22a5,
original ecu is p13,
now i have tuned ecu p30 with tunbasemap h22a (crome) but car's don't start.
i have tested some file but nothing good.
please everyone can help me?
regards
Posted: Wed Jan 17, 2018 3:39 pm
by Drax
are you sure its a problem with the map?
could it not be something common like the dizzy?
what happens/doesnt happen when you try and start her?
Posted: Wed Jan 17, 2018 3:49 pm
by orni777
i have tested this file;
H22Abase.bin = Code 13, runs just about but with lumpy idle.
H22JDMfinal.bin = Code 39, runs but worse than above.
DynotunedH22A = Code 20/16, car doesnt start
Crome Stock P13 H22A 240cc.bin = Car doesnt start
i don't have hondata....but i think no need hondata for stock engine
regards
Posted: Wed Jan 17, 2018 7:20 pm
by newkid
When engine was swapped was it converted to obd1? Or left obd2?
Posted: Wed Jan 17, 2018 10:21 pm
by orni777
before h22a2 obd1
now is swapped with h22a5 with obd1
injector 290cc
regards
Posted: Wed Jan 17, 2018 10:57 pm
by newkid
Does it run on the p13 ecu?
Posted: Wed Jan 17, 2018 11:16 pm
by orni777
yes,of course with p13 run good...
anyone have a good file bin stock h22 for test with p30 ecu?
Posted: Thu Jan 18, 2018 1:01 pm
by orni777
Who can help me for good file.bin h22 for ecu p30?
