Lude Generation

Hi I have H22a prelude and was just wondering if anybody knew of a way to test if the VTEC is working while stationerie .?.?

I want to say jack up the front, get it on stands and then go for it however there’s probably another way, what’s the reason for testing it stationary?

that is an option I just wondered if there was a safer way....
Basically I have stripped it to race, we race them on the beach but obviously only at select times so I’d like to make sure it was working before I took it down for the 1st time

Have you got any particular reason to think it isn't working?

The best way is just to drive it. Make sure the engine is up to temp, full of oil and then rev it through the rev range in 2nd gear or higher. You will hear (and feel) clearly when vtec engages, around 5400 rpm.

I am pretty sure the car has to think that it is travelling faster than 18mph before VTEC will engage.

There is no real reason why it wouldn’t work, just I have never driven it and it’s been sat for a while, I have removed some auxiliary wiring that will not be needed but still have not fault lights etc so hopefully it will be fine